POWER 1 2 3 4 5 6 7 8 9 +10 0 MEM FRQ DIRECT TUNE PRESET FM MONO BAND X ON OFF CH VOL SMART SMT MUTE GUIDE MENU C M CTR OSD ENT AUD CD SEARCH- SEARCH+ S R SUB SUR TUN TAPE EXT DEVICE / INPUT V1 V2 V3 V4 V5 RR-1060 RR-1060 Universal Learning Remote Control Télécommande universelle à apprentissage de commandes Spanish Telecomando universale programmabile Lernfähige Universalfernbedienung Nederlands Programmerbar fjärrkontroll Controlo remoto universal de apre
Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives.
RR-1060 Layout • Disposition des commandes Spanish • Disposizione dei tasti Aufbau • Dutch • Layout Apresentação Расположение органов управления � � POWER � 1 2 3 4 5 6 7 8 9 +10 0 MEM FRQ DIRECT TUNE PRESET FM MONO BAND X ON OFF CH VOL SMART SMT GUIDE MUTE MENU C M CTR OSD ENT SEARCH- SEARCH+ S R SUB SUR � AUD � CD TUN TAPE EXT DEVICE / INPUT V1 V2 V3 RR-1060 V4 V5
POWER 1 2 3 4 5 6 7 8 9 +10 0 MEM � FRQ DIRECT TUNE PRESET X ON OFF CH VOL � SMART SMT MUTE GUIDE MENU C M CTR BAND �� OSD �� ENT FM MONO � SEARCH- SEARCH+ S R SUB SUR CD DISC1 DISC2 DISC3 DISC4 EQ DYN REC ZONE SUR+ DISC- DISC+ PROG RANDOM REPEAT 2CH PL C PL M 5CH 7CH DIGEST TITLE P-SCAN OPEN DISPLAY AUDIO ANGLE SBTITLE ZOOM DISP TAPE2 PHONO TONE D-SLT A-B GOTO SLOW P-TUN TP TA DVD � DISC5 RESUME REPEAT SCAN PTY INPUT 1
RR-1060 Flip Down Cover • Volet rabattable Spanish • Sportellino apribile Aufklappbare Abdeckung • Dutch Uppfällbart lock • Tampa articulada Откидывающаяся вниз крышка LIGHT LIGHT
Character Map • Jeu des caractères affichés • Spanish • Lista dei caratteri Zeichenübersicht • Dutch Teckenbeskrivning • Mapa de Caracteres • Таблица символов Learning Commands • Apprentissage de commandes • Spanish Apprendimento comandi Lernen von Befehlen • Dutch Inlärning av kommandon Aprendizagem de Comandos Таблица символов POWER 1 2 3 4 5 6 7 8 +10 0 OFF CH VOL 9 MEM FRQ DIRECT ON X SMART SMT GUIDE TUNE PRESET MUTE MENU M C OSD CTR ENT FM MONO BAND AUD CD V1 V2 SE
RR-1060 Contents Layout Flip Down Cover Character Map Learning Commands 2 4 5 5 Introduction .............................................................. 8 Key Features 8 Sensible Precautions 8 Battery Installation 8 Overview ..................................................................
Learning Commands From Another Remote ............... 20 Learning Commands 20 Multi-Step Button Learning 21 Smart Macro Programming ...................................... 22 Smart Macro Programming 22 Clearing a Smart Macro 23 Changing a Smart Macro 23 Clearing learned commands ..................................... 24 Clearing a Single Learned Command 24 Clearing All Learned Commands for a DEVICE/INPUT Button Clearing All Learned Commands for ALL DEVICE/INPUT Buttons 24 25 Custom Labels ..............
RR-1060 Introduction The RR-1060 Universal Learning Remote Control can replace up to nine remote controls, operating A/V components from Rotel or other brands. Key Features • Programmed to operate Rotel surround sound processors, receivers, and DVD players. • Simple programming for hundreds of components using built-in codes. • Learning function to teach the RR-1060 commands from other remotes. Multi-step learning on five buttons for multiple command sequences from other remotes.
Overview The RR-1060 is a universal learning remote control that can operate all of the components in your audio/video system. Control codes for Rotel components are already programmed. You can easily customize the RR-1060 to operate other components by selecting command sets for hundreds of components from the RR-1060’s extensive database. See the Programming section of this manual for easy to follow instructions.
RR-1060 Folding Cover A folding cover conceals the buttons at the bottom of the RR-1060. These buttons provide extra command functions. Leave the folding cover in the closed position to simplify the RR-1060 for routine use. Open the cover to access the additional buttons. Device/Input Buttons Two rows of buttons on the folding cover (AUD, CD, TUN, TAPE, EXT and V1–V5) are used to select a component for control by the remote and, if desired, to activate the input for the component you are operating.
EXT Button The EXT button is a special input selection button for Rotel audio/video receivers or surround sound processors. It is used to select the multi-channel analog inputs when playing SACD or DVD-A discs. This bypasses the digital/analog processing in the receiver or surround sound processor. Press and hold the EXT button for more than one second to select the multi-channel analog input on a Rotel A/V receiver. The EXT button contains a duplicate of the remote commands programmed in the V1 device.
RR-1060 At the bottom right are nine buttons that duplicate the cursor functions for cable or satellite TV receiver or audio/video components plus four round buttons are for extra functions, such as Last Channel, Viewing Guide, etc. At the bottom left are five oval buttons that duplicate the basic transport control functions (Play, Fast Forward, Pause, etc.) of a CD player, DVD player or video tape recorder. NOTE: The numeric buttons, 0 – 9, are also available for sending Smart Macros.
Operating the RR-1060 This section of the manual explains the basic operation of the RR-1060 and most of its standard features. NOTE: The AUD DEVICE/INPUT button of the RR-1060 is pre-programmed with control codes for Rotel A/V receivers or surround sound processors. The V1 button is pre-programmed to operate Rotel DVD players. The CD button is pre-programmed to operate Rotel CD players.The other DEVICE/INPUT buttons (TUN, TAPE and V2 – V5) are unprogrammed.
RR-1060 When a button is pressed, a beep tone confirmation is heard. This feature can be disabled. See the Disabling the Beep Tone section of the manual. When an IR command is being sent, a triangular indicator appears in the upper right corner of the LCD display and the label for the command is shown in the display. These labels can be customized. See the Labelling Command Buttons section of this manual. If a button is pressed that has no command, the LCD shows NO DATA.
Programming The RR-1060 contains hundreds of command sets for components. Programming the remote involves selecting the command sets that correspond to the components in your system and assigning each of them to one of the nine DEVICE buttons by entering the 4-digit code for that component. This need only be done once during initial setup of the RR-1060. There are four ways of finding the correct 4-digit code. The easiest way to program Rotel components is to search by the model number.
RR-1060 1. Press the DEVICE/INPUT button where you wish to program this component’s code (AUD, CD, TUN, TAPE and V1–V5). 2. Press the SETUP button (the LCD displays SETUP). Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until SETUP MODEL appears in the display. Press the ENT button to confirm. 4. Press the UP/DOWN cursor buttons until the type of component you are searching for appears in the display (AUD, DVD, CD) Press the ENT button to confirm.
To program using the brand search: 1. Press the DEVICE/INPUT button where you wish to program this component’s codes (AUD, CD, TUN, TAPE and V1–V5). 2. Press the SETUP button (the LCD displays SETUP). Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until SETUP BRAND appears in the display. Press the ENT button to confirm. 4. Press the UP/DOWN cursor buttons until the type of component you are searching for appears in the display (TV, VCR, SAT, CTV, DVD, CD, etc.
RR-1060 Programming by 4-Digit Code Find your audio/video component in the 4-digit code list. Then proceed as follows: 1. Press the DEVICE/INPUT button where you wish to program this component’s codes (AUD, CD, TUN, TAPE and V1–V5). 2. Press the SETUP button (the LCD displays SETUP). Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until SETUP CODE appears in the display. Press the ENT button to confirm. 4. Input the 4-digit code using the 0–9 buttons.
Programming by Auto-Search To search for a code from the full list of available 4-digit codes for a type of component: 1. Press the DEVICE/INPUT button where you wish to program this component’s codes (AUD, CD, TUN, TAPE and V1–V5). 2. Press the SETUP button (the LCD displays SETUP). Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until SETUP A. SEARCH appears in the display. Press the ENT button to confirm. 4.
RR-1060 Learning Commands From Another Remote If you are unable to find a command set using the Programming steps, or if you need additional commands, you can teach the RR-1060 commands directly from your existing remotes. This procedure is called Learning. Learning Commands To teach the RR-1060 the commands from one of your other remotes, place the two remote controls end to end as shown in the illustration at the front of this manual.
NOTE : The RR-1060 has enough memory to learn 600 commands. If the memory capacity is reached, the LCD displays FULL when you attempt to learn a command. Multi-Step Button Learning The five buttons labeled SCAN, PTY, P-TUN, TP, TA provide a special option – the ability to learn up to three different commands on a single button.
RR-1060 Smart Macro Programming Twenty of the buttons on the RR-1060 (the 10 DEVICE/INPUT buttons plus the numeric buttons 0 – 9) can store multiple command macro sequences – for example, a sequence that turns on the TV set, selects channel 5, turns on the surround processor, and selects the TV input. Smart Macro Programming A macro sequence is sent by pressing the SMART button followed by the button where the macro is stored.
Clearing a Smart Macro To clear a previously saved Smart Macro: 1. Press the SETUP button and then press the UP/ DOWN cursor buttons until SMART appears in the display. Press ENT. 2. Press the UP/DOWN cursor buttons until SMART CLEAR appears in the display. Press the ENT button to confirm. CLEAR SMART? appears in the display. 3. Press the Smart Macro button to be cleared (for example, press 1 to clear a Smart Macro stored in the 1 button). 4. A confirmation appears in the LCD.
RR-1060 7. A confirmation appears in the LCD. Use the UP/DOWN buttons to select either YES (to change the command) or NO (to discard the changes). Press ENT to confirm. NOTE: If you attempt to change an unprogrammed Smart Macro button, the word EMPTY appears and the remote returns to normal mode.
3. Press the UP/DOWN cursor buttons until CLEAR ONE DEV appears in the display. 4. Press the ENT button to delete all learned commands for the DEVICE/INPUT button. Clearing All Learned Commands for ALL DEVICE/INPUT Buttons 1. Press the SETUP button (the LCD displays SETUP). Press the UP/DOWN cursor buttons until EDIT appears in the display. Press the ENT button to confirm. 2. Press the UP/DOWN cursor buttons until CLEAR ALL DEV appears in the display. 3.
RR-1060 Editing DEVICE/INPUT button labels To change the label for a button, make sure that you have selected the Page 2 set of labels (see above), then: 1. Press the SETUP button. 2. Press the UP/DOWN cursor buttons until EDIT appears in the display. Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until EDIT DEVICE appears in the display. Press the ENT button to confirm. 4. Press the DEVICE/INPUT button (AUD, CD, TUN, TAPE, EXT, V1–V5) that you wish to relabel.
5. Press the COMMAND button that you wish to relabel. The current label appears on the second line of the display. 6. Press the +/– buttons to select a character to change and the UP/DOWN cursor buttons to change the letter. The “Character Map” illustration shows the available characters. Labels can be a maximum of 8 characters. 7. When the new label is complete, press the SETUP button to save the new label. 8. A confirmation message appears in the LCD.
RR-1060 Additional Setup Options Volume/Mute Punch-Through In many systems, the volume is adjusted at the TV set or the A/V processor. For convenience, the RR-1060 has a Volume Punch-Through feature that copies the volume and mute commands from either the TV device or AUD to DEVICE/INPUT buttons for other components such as CD players, VCRs, SAT receivers, and DVD players.
Disabling the Beep Tone As shipped from the factory, the RR-1060 beeps as confirmation whenever a button is pressed. This feature can be disabled or enabled as follows: 1. Press the SETUP button (the LCD displays SETUP). 2. Press the UP/DOWN cursor buttons until BEEP SOUND appears in the display. Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until BEEP ON or BEEP OFF appears in the display. Press the ENT button to select the desired option.
RR-1060 The data transfer begins. The sending remote displays SENDING DATA. The receiving remote displays RECEIVING DATA. At the completion of the data transfer (which may take 4 or 5 minutes), one of the following confirmation messages appears in the display of the receiving RR-1060: • If the data transfer is successful, the SEND OK prompt appears on the sending remote and RECEIVE OK appears on the receiving remote.
The Rotel Co. Ltd. 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Phone: +81 3-5458-5325 Fax: +81 3-5458-5310 Rotel of America 54 Concord Street North Reading, MA 01864-2699 USA Phone: +1 978-664-3820 Fax: +1 978-664-4109 Rotel Europe Dale Road Worthing, West Sussex BN11 2BH England Phone: +44 (0)1903 221600 Fax: +44 (0)1903 221525 Rotel Deutschland Kleine Heide 12 D-33790 Halle/Westf. Germany Phone: +49 05201-87170 Fax: +49 05201-73370 www.rotel.