Owners Manual

13English
Operating the RR-1061
This section of the manual explains the basic op-
eration of the RR-1061 and most of its standard
features.
NOTE: The AUD DEVICE/INPUT button of the
RR-1061 is pre-programmed with control codes
for Rotel A/V receivers or surround sound pro-
cessors. The V1 button is pre-programmed to
operate Rotel DVD players. The CD button is
pre-programmed to operate Rotel CD players.
The other DEVICE/INPUT buttons (TUN, TAPE
and V2 – V5) are unprogrammed. You must
program or learn commands for these DEVICE/
INPUT buttons.
Sending IR Commands
567
Instead of putting down one remote and pick-
ing up another, you simply press a button on the
RR-1061 to convert it from the remote control for
your CD player to the remote control for your TV
set. Here’s how:
1. Press a DEVICE/INPUT button (for under one
second) to activate the command set for the
desired component. For example, press the
AUD button to control a Rotel surround pro-
cessor. The label for your selection appears
in the display. The selected command set re-
mains active until you press a different DE-
VICE/INPUT button.
2. Press a COMMAND button to send an IR com-
mand to the component you have selected.
For example, press the POWER ON button to
turn on a Rotel surround processor. The label
for the COMMAND button appears in the dis-
play. If the label “NO DATA” appears in the
display, the button has no learned command
for that DEVICE.
NOTE: The default labels that appear in the dis-
play match the button labels. You can customize
the labels for every DEVICE/INPUT and COM-
MAND button.
Remember that the COMMAND buttons duplicate
controls on many different types of audio/video
components. Their function depends on the type
of component selected. Make sure that you have
5/22/08 11:28:04 AM 5/22/08 11:28:04 AM