Owners Manual

31English

After 30 seconds or when any button is pressed,

the remotes return to normal operation.

NOTE: Do not attempt to use the CLONE func-

tion to transfer data from any remote other than

another Rotel RR-1061.

Restore Factory Defaults

-q

You can restore the RR-1061 to the factory default

conﬁ guration with a simple procedure described

below. Restoring the factory conﬁ guration restores

all of the preset code sets for DEVICE/INPUT

buttons, clears all learned commands, restores

all factory labels, restores the factory punch-thru

settings, and turns the beep tone on.

1. Press the SETUP button.

2. Press the UP/DOWN cursor buttons until DE-

FAULT SETTING appears in the display. Press

the ENT button to conﬁ rm.

3. A conﬁ rmation message appears in the LCD.

Use the UP/DOWN buttons to select either

RESET YES (to restore the factory defaults) or

RESET NO (to exit without making any chang-

es). Press the ENT button to conﬁ rm the selec-

tion.

4. In a few seconds, a RESET OK prompt in the

LCD will conﬁ rm the restoring of factory de-

faults.

NOTE: Smart Macros are not reset by restoring

factory defaults. Use the Clearing a Smart Macro

instructions to delete stored Smart Macros.