36 English RR-1070 Owner’s Manual The Rotel Co. Ltd. 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Phone: +81 3-5458-5325 Fax: +81 3-5458-5310 Rotel of America 54 Concord Street North Reading, MA 01864-2699 USA Phone: +1 978-664-3820 Fax: +1 978-664-4109 Rotel Europe Dale Road Worthing, West Sussex BN11 2BH England Phone: +44 (0)1903 221 600 Fax: +44 (0)1903 221 525 Rotel Deutschland Kleine Heide 12 D-33790 Halle/Westf. Germany Phone: +49 05201-87170 Fax: +49 05201-73370 www.rotel.
English RR-1070 Contents Introduction .................................................................. 3 Key Features ................................................................ 3 Optional Features ......................................................... 3 Getting to Know the RR-1070 ....................................... 4 Battery Installation and Charging ................................. 5 Getting Started .............................................................
4 English RR-1070 Control Codes LD Aiwa Denon Disco Vision Funai Hitachi Kenwood Magnavox Marantz Mitsubishi NAD Panasonic Philips Pioneer RCA Realistic Rotel Sharp Sony Victor Yamaha 0177 0167 0037 0177 0037 0107, 0127 0047 0047 0157 0157 0097, 0197 0047 0037, 0057, 0157 0187 0177 0007, 0017 0147 0067, 0077, 0137 0117 0027, 0087 3 Introduction DVD Akai Denon Finlux Goldstar Grundig Hanseatic Harman/Kardon Hitachi JVC Kenwood LG Linn Loewe Marantz Magnavox Micromedia Micromega Mitsubishi NAD Onkyo
English RR-1070 Getting to Know the RR-1070 Control Codes The RR-1070 has three type of control keys – soft keys, short cut keys and hard keys. Since most of the keys discussed in this manual are soft keys these will simply be called “keys”. When short cut keys or hard keys are discussed they will always be specified. Soft Keys - The largest part of the touch screen is used to display “soft” keys. The soft keys displayed change with the device you’ve selected to control.
32 English RR-1070 5 Control Codes Battery Installation and Charging CD Supplied with the RR-1070 are four AAA NiMH rechargeable batteries, a special charging connector and a power adapter. Before using the remote the batteries should be charged for at least 10 hours.
Getting Started The RR-1070 has three type of keys - Hard Keys, Hot Keys and Soft Keys. Each type is described in a following section. Since most keys being referred to in the manual are soft keys, they will simply be referred to as “keys”. Whenever a key is referred to its name or label is shown in small capital letters like MENU. Whenever a hot key or hard key is referred to it is noted. Screen names are shown in bold letters like Home. After the batteries are installed the Home page is displayed.
30 English RR-1070 Control Codes SAT/DSS/CBL Abc 0253, 0373 Akiba 0963 Alba 0963 Allsat 0923 Alpha star 0773 Amstrad 1143 Ansonic 0953 Antronix 0133 Archer 0133, 0283 Astra 1053 Autovox 1113 Bbt 0073 Beko 0963 British Sky Broadcasting (BskyB) 1143 BT 1033 Cabletime 0163 Canal Digital 0943 Canal Satellite 0943, 0953 Canal + 0863 Canalt 0943 Carena 0963 Clyde Cablevision 0193 Colour voice 0303, 0343 Comtronics 0213, 0273 Conrad 1063 Cyrus 0923 DNT 0923 Dual 1113 D-box 1073 Eagle Comtronics 0273 Eastern 00
English RR-1070 Configuration and Set Up For most users programming the RR-1070 involves starting with one of the many preprogramming IR code sets that are available for each component. Then you can add to the preprogramming codes and fine tune the configuration as needed. There are three ways to select one of the preprogramming control code sets. In order of preference they are: • Brand Name Search – search for your particular component in the brand name database.
28 English RR-1070 Control Codes TV Akai Alba Amstrad Anam AOC Bauer Candle Centurion Citizen Colortyme Concerto Craig Curtis Mathes Daewoo Decca Dixi Elta Emerson Envision Etron Fisher Formenti GE Gec Gemini Genexxa Goldstar Goodmans/Tashiko Hitachi Jensen JVC Kenwood Logik Luxman Magnasonic Magnavox Marantz Matsui Memorex MGA Mitsubishi Montgomery MTC NAD NEC Nikkai Nikko Optimus Optonica 0331 0431 0481 0251 0361 0441 0351, 0361 0411 0351, 0361 0361 0351 0251 0161, 0361 0291, 0301, 0331 0271 0331 033
English RR-1070 Auto Search Select a preprogramming code by searching through the library. Specifications • Turn on the device you want the RR-1070 to control before starting this setup procedure. • Touch the hot key to go to the Main Menu page. • Touch SETUP to go to the Setup page. • Touch AUTO SEARCH to go to the Auto Search device selection page. • Touch one of the device keys,. (e.g. TV), to select the kind of device you want the RR-1070 to control.
26 English RR-1070 Q: What is Cloning? A: The Cloning feature enables you to transfer data from one RR-1070 to another. This can only be done between two RR-1070 units. See the Cloning the RR-1070 Commands section. Q: What is PC Link? A : The PC Link feature enables you to upload and download remote setting data to and from your Personal Computer. You can also perform remote customization such as different key shape or layout editing with the PC software.
English RR-1070 25 Advanced Set Up Troubleshooting and Common Questions Editing Key Labels The letter and symbols shown on most of the soft keys can be changed. During the editing process you will go to the Device Name or Key Name editing pages. Q: My RR-1070 is not working! A: Be sure the supplied batteries are installed with the correct polarity and that they are fully charged. See the Battery Installation and Charging section of this manual.
24 English RR-1070 Copy One Device To copy all the user settings for a single device: • On the sender and receiver units touch MENU. The Main Menu page appears. • Touch CLONE to go to the Clone page. • On the receiver unit touch RECEIVE. A Data Loss confirmation page appears. Touch YES to continue. Touch NO to cancel the process and return to the previous page. • On the sender unit touch COPY ONE DEVICE. The Device Selection page appears. • Touch a device to select it. A Sending Data message appears.
English RR-1070 • Touch the key you want the first key to exchange positions with. If necessary use and to go to other pages for that device. Remember the keys must be the same type and size. • The second Move Key confirmation page appears showing the two keys chosen to exchange positions. • Touch OK to accept the move. A confirmation page appears if the move is completed. • If the move is not completed an error message explains why. You are returned to the previous Move Key selection page.
22 English RR-1070 Before you program a Smart Key be sure that all of the control commands you want to use are preprogramming or have been learned by the RR-1070. The Smart Key feature simply allows you to record a sequence of individual RR-1070 commands and play them back when you touch the Smart Key. Touch the hot key to display the Main Menu. Touch SMART. The Smart Key editing page is displayed. From this page you can add, delete, edit or rename a Smart Key.
Remote Setting Clock Setting To reset the time displayed in the upper right corner of the touch screen: • Touch the hot key to go to the Main Menu. • Touch REMOTE SETTING to go to the Remote Setting page. • Touch CLOCK. The time/day setting page appears. • To change the time setting touch SET below the Current Time box. The Set Clock page appears. • Touch the numeric keys to enter a new time. The 24 hour format is used. You must touch four numeric keys to complete the time resetting.
20 English RR-1070 • If you touch ONE DEVICE a device selection page is shown. Touch to select a device. A “Clear all Moved keys in this device?” message is displayed. • Touch YES to confirm. A “Restore is completed!” message is displayed. Touch NO to stop the process and return to the previous page. • Or touch the HOME or MENU hot key to stop the process and return to the corresponding page. • If you touch ALL DEVICES a “Clear all Moved keys?” message is displayed. • Touch YES to confirm.
RR-1070 Clear Learning Touch this key to delete learned IR commands and restore the factory original commands. If there was no command in the original configuration this step leaves the key with no IR command programmed. • From the Reset Default menu touch CLEAR LEARNING. The Clear Learning page is displayed. • Touch ONE KEY, ONE DEVICE or ALL DEVICES. • If you touch ONE KEY a device selection page is shown. Touch to select a device. The first control page for that device is displayed.