RSP-975 DIGITAL SURROUND SOUND PROCESSOR DIGITAL SURROUND SOUND PROCESSOR RSP-975 LISTENING MASTER VOLUME STANDBY CD TUNER OPTICAL COAX 1 TAPE AUX DVD VIDEO 1 VIDEO 2 VIDEO 3 MUTE PEAK REMOTE dB DIGITAL INPUT COAX 2 ANALOG INPUT DVD DIGITAL LOCK REMOTE SENSOR DIGITAL INPUT DYNAMIC RANGE DOLBY DIGITAL 5.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not allow foreign objects to get into the enclosure.
RSP-975 Figure 1: Controls and Connections 1 2 3 5 4 6 DIGITAL SURROUND SOUND PROCESSOR RSP-975 LISTENING MASTER VOLUME CD TUNER OPTICAL COAX 1 STANDBY AUX TAPE DVD VIDEO 1 VIDEO 2 VIDEO 3 MUTE PEAK dB REMOTE DIGITAL INPUT ANALOG INPUT DVD COAX 2 DYNAMIC RANGE DIGITAL LOCK REMOTE SENSOR DIGITAL INPUT 7 8 9 10 11 12 20 19 21 5.
DIGITAL SURROUND SOUND PROCESSOR RSP-975 Figure 2: Remote Control Figure 3: Output Connections 29 AUD CD TAPE AUX SAT TV VCR CBL COMPOSITE 30 TV MONITOR POWER VOL BAND 31 MUTE CH T/V SURROUND + ON SCREEN GUIDE 32 MENU PAUSE C. DELAY SEARCH – SEARCH + TRACK – PLAY SEL 35 TRACK + 36 DOWN STOP DYNAMIC PRE CH RECALL OPN/CLS DIGITAL INPUT 5.
RSP-975 Figure 4: Input Connections DVD PLAYER AUDIO OUTPUT VIDEO OUTPUT COAX OPTI S-VIDEO LEFT DIGITAL OUT COMPOSITE RIGHT DTS DECODER FRONT REAR DIGITAL L IN CENTER IN OPTI INPUT OUT COAX OUTPUT 5.1 CH R SUBWOOFER ROTEL RSP-975 DIGITAL INPUT 5.1 CH INPUT OPTICAL DIGITAL SURROUND SOUND PROCESSOR MODEL NO.
DIGITAL SURROUND SOUND PROCESSOR RSP-975 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Contents Figure 1: Controls and Connections 3 Figure 2: Remote Control 4 MAIN Screen 12 Figure 3: Output Connections 4 OUTPUT BALANCE Screen 12 Figure 4: Input Connections 5 About Rotel 7 Source Inputs 26 13 Getting Started ______________________________________ 7 Digital Inputs 24 13 13 Rear Panel Input Connections ________________________ 13 RSP-975 Key Features 7 5.
RSP-975 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ About Rotel A family whose passionate interest in music led them to manufacture high fidelity components of uncompromising quality founded Rotel over 30 years ago. Through the years that passion has remained undiminished and the family goal of providing exceptional value for audiophiles and music lovers regardless of their budget, is shared by all Rotel employees.
DIGITAL SURROUND SOUND PROCESSOR RSP-975 The DIGITAL INPUT button allows you select one of these digital inputs to use in place of the ANALOG INPUT for each LISTENING SOURCE SELECT button. For example, if you have a DVD player , you can connect the DVD player’s digital output to the DVD DIGITAL INPUT and then tell the RSP-975 to use the digital signal in place of the analog signal. Push the front panel STANDBY button (or the handheld remote POWER button) to fully activate the RSP-975.
RSP-975 SURROUND MODE Button 14 32 The SURROUND MODE button is used to select one of three surround modes (Dolby Pro Logic, Dolby Digital, or Stereo) as described in the section immediately above. To make a selection, press the SURROUND MODE button. Each time you press the button, the mode will cycle to the next available setting as indicated by the SURROUND MODE LEDs.
DIGITAL SURROUND SOUND PROCESSOR RSP-975 Programming the RR-939 SELECT Button (Digital Input) The RR-939 is preprogrammed from the factory to operate the RSP-975. Should the AUDIO command set on your RR-939 not operate the RSP-975, it’s possible that the programming had been inadvertently changed. To reprogram the remote to operate the RSP-975: 1. Press the AUDIO button at the top of the remote while simultaneously pressing the MUTE button and hold both for at least one second.
RSP-975 CENTER DELAY Button (remote only) 36 The CENTER DELAY button works like the SURROUND DELAY button above, except that it increases the delay the center channel speaker, if present. CENTER DELAY is only available in Dolby Digital surround mode. The CENTER DELAY button steps sequentially through five available settings (O, 1, 2, 3, 4, 5 ms). NOTE: The CENTER DELAY setting is system-wide. Changing it will increase or decrease the relative delay time for all inputs in Dolby Digital surround mode.
DIGITAL SURROUND SOUND PROCESSOR RSP-975 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ The On-Screen Display The RSP-975 features two ON-SCREEN DISPLAY screens to help operate the system. These screens are available at any time by pressing the ON-SCREEN MENU button on the remote control to activate the first screen. Push the button a second time to go to the second screen (OUTPUT BALANCE). Push the button a third time to cancel the ON-SCREEN DISPLAY.
RSP-975 INPUT: This indication appears only when an ANALOG source input is selected. It shows the current INPUT LEVEL setting for the active source input and can be adjusted with the front panel INPUT LEVEL buttons. This change is not temporary. It is memorized and will be recalled each time that source input is selected.
DIGITAL SURROUND SOUND PROCESSOR RSP-975 Source Outputs ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 26 Four of the input sources have corresponding sets of RCA output connections for routing the signal of the RSP-975 to audio or video tape recorders for recording. TAPE provides a stereo pair of audio outputs. Connect standard RCA cables from the LEFT and RIGHT outputs to the LEFT and RIGHT record inputs on your audio tape recorder.
RSP-975 Things become a little more complex in systems with a subwoofer. For example, the system will generally not redirect bass information away from a LARGE speaker to the subwoofer. Thus, the decision you need to make when confronted with a choice of LARGE or SMALL is whether or not you want the particular speaker to play the deep bass information or whether your would prefer that the deep bass information be sent to the subwoofer.
RSP-975 DIGITAL SURROUND SOUND PROCESSOR The Rotel Co. Ltd. 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Phone: +81 3-5458-5325 Fax: +81 3-5458-5310 Rotel of America 54 Concord Street North Reading, MA 01864-2699 USA Phone: +1 978-664-3820 Fax: +1 978-664-4109 Rotel Europe Meadow Road Worthing, West Sussex BN11 2RX England Phone: +44 (0)1903 524 813 Fax: +44 (0)1903 524 831 Rotel Deutschland Kleine Heide 12 D-33790 Halle/Westf.
