Info Sheet

SPECIFICATIONS
350 watts/channel (4 ohms)
200 watts/channel (8 ohms)
< 0.008%
< 0.03%
20 Hz-20k Hz (+0 dB, +0.4 dB)
10 Hz-100k Hz (+0 dB, -0.4 dB)
350
5.2 mV / 47k ohms
340 mV / 100k ohms
540 mV / 100k ohms
60 mV
3.5 V
5.5 V
1.9 V / 100 ohms
±10 dB at 100 Hz
±10 dB at 10k Hz
80 dB
102 dB
> 55 dB
> 55 dB
Maximum Power Output
Continuous Power Output
Total Harmonic Distortion
Intermodulation Distortion
(60 Hz : 7 kHz, 4:1)
Frequency Response
Phono Input
Line Level Inputs
Damping Factor
(20 Hz - 20kHz, 8 ohms)
Input Sensitivity /
Impedance
Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Input Overload
Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Preamplifier Output Level /
Impedance
Tone Controls
Bass
Treble
Signal to Noise Ratio
(IHF “A” weighted)
Phono Input
Line Level Inputs
Channel Separation
Phono Input
Line Level Inputs
Digital Section
Frequency Response
Signal to Noise Ratio
(IHF “A” weighted)
Input Sensitivity/Impedance
Preamplifier Output Level
Coaxial/Optical Digital Signals
PC-USB
Power Requirements
Europe
USA
Power Consumption
Standby Power Consumption
Normal
Network Wakeup
BTU (4 ohms, 1/8 power)
Dimensions (W x H x D)
Front Panel Height
Weight (net)
Finish
20 Hz - 20k Hz (0 ± 0.4 dB)
102 dB
0 dBFs / 75 ohms
1.3 V (at -20 dB Volume Position)
SPDIF LPCM (up to 192kHz 24 bit)
USB Audio Class 1.0
(up to 96kHz 24-bit)
USB Audio Class 2.0
(up to 384kHz 32-bit)*
*Driver installation required
DSD and DoP support
230 V, 50 Hz
120 V, 60 Hz
500 watts
< 0.5 watts
< 2 watts
1303 BTU/h
485 x 150 x 452 mm
19" x 6" x 17 3/4"
132 mm / 5 1/4"
28.9 kg, 63.7 lb
Black
STEREO INTEGRATED AMPLIFIER
X3
All specifications are accurate at the time of printing.
Michi reserves the right to make improvements without notice.