SDS

S
A
FETY D
A
T
A
SHEET
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
2 / 15
US
Version 1.2 Revision Date: 07/07/2015 Print Date: 07/08/2015
Used oil may contain harmful impurities.
Not classified as flammable but will burn.
The classification of this material is based on OSHA HCS 2012 criteria.
Under normal conditions of use or in a foreseeable emergency, this product does not meet the
definition of a hazardous chemical when evaluated according to the OSHA Hazard Communica-
tion Standard, 29 CFR 1910.1200.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature : Highly refined mineral oil.
Synthetic base oil and additives.
The highly refined mineral oil contains <3% (w/w) DMSO-
extract, according to IP346.
* contains one or more of the following CAS-numbers: 64742-
53-6, 64742-54-7, 64742-55-8, 64742-56-9, 64742-65-0,
68037-01-4, 72623-86-0, 72623-87-1, 8042-47-5, 848301-69-
9.
Hazardous components
Chemical Name Synonyms CAS-No. Concentration (%)
Interchangeable low vis-
cosity base oil (<20,5 cSt
@40°C) *
Not Assigned
0 - 90
SECTION 4. FIRST-AID MEASURES
General advice : Not expected to be a health hazard when used under normal
conditions.
If inhaled : No treatment necessary under normal conditions of use.
If symptoms persist, obtain medical advice.
In case of skin contact : Remove contaminated clothing. Flush exposed area with wa-
ter and follow by washing with soap if available.
If persistent irritation occurs, obtain medical attention.
In case of eye contact : Flush eye with copious quantities of water.
If persistent irritation occurs, obtain medical attention.
If swallowed : In general no treatment is necessary unless large quantities
are swallowed, however, get medical advice.
Most important symptoms
and effects, both acute and
delayed
: Oil acne/folliculitis signs and symptoms may include formation
of black pustules and spots on the skin of exposed areas.
Ingestion may result in nausea, vomiting and/or diarrhoea.