User's Manual

1669-R RFD OPERATOR MANUAL REV. PP1
59
The test results will be saved to a file. Select “File” and then “Print” to print the test
results to the computer’s printer. Select “F
ile” and then “Save” to save this
configuration.
For future tests on the same computer, start HyperTerminal, Select “F
ile” and then
“O
pen”, select the configuration name. Select “Transfer” and then “Capture text…”. If
the same capture file name is used, the new test results will be appended to the end of
the previous test results.
Close the HyperTerminal window when the testing is completed.
If the above (or similar) text does not appear shortly after installing the Test Box
antenna, check that the serial cable is connected from the Test Box to the computer
correctly and that the selection under “Con
nect using:” matches the computer serial port
number that the Test Box serial cable is connected to.