User's Manual

1669-R RFD OPERATOR MANUAL REV. PP1
62
10.3.1. RFDUSER Configuration Commands.
Type the following keystrokes to view the current configuration, and change
programmable Coefficients. Pressing the ENTER key displays a command description
line. Pressing the ESC key exits the program and returns to MS-DOS.
>(A)ddress,(U)nit ID,(F)requency,(R)ead, ESC to Exit
• A Address – Change the system address
• U Unit ID – Change the Unit ID
• F Frequency – Change the Frequency
• R Read Coefficients – Displays current settings
>A
>System Address = 57383 ? Displays current System Address and allows a
new System Address to be entered. Press ENTER to keep current System Address.
>U
>Unit ID (1-8) = 2 ? Displays current Unit ID and allows a new Unit
ID to be entered. Press ENTER to keep current Unit ID.
>F
>Desired TX frequency (in Mhz) ? Allows a new frequency to be entered.
Press ENTER to keep current frequency.