Manualshelf

User's Manual

ManualsBrandsRothenbuhler Engineering ManualsElectronicsModel 1669-3, Rule Part 90.203(j)(3)
1234567
Test Box.
The Test Box allows the user to test Remote and Controller batteries under load
as well as test Remote Arm/Fire functions, and test Remote receivers. The Test
Box also serves as the programming interface between a computer and a RFD
Unit.
Figure 9-1 Test Box.
TEST BOX DESCRIPTIONS.
Antenna / Battery Charger Connector:
The Test Box has an Antenna/Battery Charger connector like the Remotes and
Controller. Installing an antenna from the system onto the antenna connector
turns on the Test Box. The Test Box has an internal battery pack that must be
recharged using the system battery charger.