User's Manual

1673 OPERATION MANUAL REV A

2.1.3. The Controller Unit is capable of commanding up to 64 Remote Units, in 8-

Remote groups that are hereafter referred to as “Systems”.

2.1.4. The Controller can operate in standby for typically 12-16 hours before

recharging is required. The Controller’s charger is internal and is capable of worldwide

operation. Typical charge time is 3 hours. The battery system features test and

discharge functions.

2.1.5. The Controller features an internal history event log which stores 1024 events

in non-volatile memory. The history log can be used to obtain information on the

operation and performance of the RFD. Each event is logged with the current date and

time along with GPS coordinates (if available).

2.1.6. When the Electric Detonator circuit has been selected on the Controller,

transmission signal levels from responding Remote Units are automatically reduced for

safety around blasting caps. The Controller’s transmission signal level remains

unchanged.