User's Manual

1673 OPERATION MANUAL REV A
12
Figure 2-6 Controller Armed Screen
2.7.10. Figure 2-6 shows the Controller Armed Screen that is displayed when the
Controller Unit is armed. The ARM TIME REMAING portion shows a count-down timer
for the Remote Units that are expected to auto-disarm first (01:59). The units associated
with the arm timer are shown to the adjacent left of the ARM TIME REMAINING timer.
Additional units that are armed, that have a different (longer) remaining arm time are
shown to the left of the asterisk.
2.7.11. In Figure 2-6, Remote Units 1 and 2 have 1 min. 59 sec. of arm time
remaining. Units 3 and 4 have a longer period until automatic disarming occurs. Once
units 1 and 2 have been disarmed or fired, the time remaining for units 3 and 4 will be
shown.
2.7.12. The actual Arm Time has a default value of 20 minutes. The arm time can be
changed in the Advanced User menu to other values if needed in the range of 1-60
minutes (See Advanced User Section of this manual). Only the Controller needs to be