User Manual

User Manual
EN
12
SPEED BUTTONS 1-4
The Speed Buttons enable quick setting of the functions indicated below. Functions in Bold type indicate the
function of these buttons when SETUP mode is selected.
SPEED BUTTON 1 (LEFT)
Pwr± change the flash power in 1/10 f-stop up/down with the dial.
up scroll up in the setup menu when SETUP is selected.
SPEED BUTTON 2 (MIDDLE LEFT)
Press this button once or twice to toggle between the modelling lamp features.
Mod switch the modelling lamp on/off with the dial.
Mod± change the modelling lamp power in 1/10 f-stop up/down with the dial.
down scroll down in the setup menu when SETUP is selected.
SPEED BUTTON 3 (MIDDLE RIGHT)
Select toggle between the displayed (found) Elinchrom flash units.
Flash and modelling lamp settings can be individually adjusted on the selected flash unit, when highlighted
with a frame.
After approx. 5 seconds the frame will disappear and adjustments in the settings will affect all units in all
Groups, when Group “ALL” is selected. If Group 1 – 4 is selected only the flash units in that Group will be
modified.
Group selection
Test
USB
Rotation ring / Dial
Set
Battery compartment cover
On/Off
Refresh
Change value
Lock
Press for 2 seconds
To refresh manual
changes made on the flash unit
Communication Transmitter
HS / EL- flash unit.
Press for 2 seconds
Speed button 2
SR
Speed button 3
Green LED
Speed button 1
Speed button 4
Blue LED
Communication camera / Transmitter HS
BUTTONS