Manualshelf

User Manual

ManualsBrandsRotolight ManualsLighting & StudioElinchrom EL-Skyport Transmitter Plus HS for Sony
11121314151617181920
EN
User Manual
13
SPEED BUTTON 4 (RIGHT)
Setup by pressing this button the functions of the speed buttons will change and the SETUP menu is
selected. In the SETUP menu features can be adjusted and activated.
Exit Exit the Setup menu and switch back to standard display mode.
ON/OFF
Press and hold for min. 2 seconds to switch the EL-SkyportTransmitter Plus HS On/Off.
GROUP BUTTON
Press to toggle between 1 through 4 groups and “ALL.”
TEST BUTTON (WITH EL LOGO)
Pressing the TEST button will fire all flashes when “ALL” is selected or any single group, 1 through 4 is
selected. Please remember to deactivate photocells for accurate
EL-Skyport triggering of your flash units.
REFRESH BUTTON
Press the Refresh button any time power setting has been done on a separate EL flash unit to update the
power setting display of the Skyport HS.
If a Group is selected, only the information for that selected Group will refresh.
When “ALL” is selected, information for all groups will be refreshed.
A flash that was not scanned and found when the Skyport HS was switched ON cannot be added with the
Refresh feature.
If a flash is added, select SETUIP and SCAN in the setup menu or switch the transmitter OFF and ON again.
The refresh can take up to 4 seconds, depending on how many flash units are found and operated by the
transmitter.
Note:
To update the display information after flash power changes have been applied directly at the flash unit,
please press the REFRESH button. Changes are not automatically updated, to avoid interferences with the
flash triggering.
ROTATION RING
Turn the rotation ring to select various functions and change power levels of the EL flashes.
SET / CONFIRMATION BUTTON (ROTATION RING)
Press to confirm a modification made in the Setup menu.
Press to switch on the display illumination.
Press to return to normal operation when Skyport HS has switched to Standby mode.
Press 2s to lock all functions and settings. Press again to unlock.
The locking feature blocks the function of the dial and other buttons to prevent mis-setting while carrying the
Skyport HS.