RotorBits making Multi-rotor Frame design easy HexCopter Frame
This Hex frame is designed for users with an existing knowledge of how to set up a multi-copter with flight control and power hardware. Frame Engine centres: 720 mm Height: 155 mm Weight: 360 g Suggested Hardware Motor: 6 x Turnigy DST-1200 Brushless Bell Motor 1200kv ESC: 6 x Turnigy Mutistar 20A Props: 6 pcs x 10 x 4.5 inch (3CW & 3CCW) Controller: Hobbyking Multi-Rotor KK2.1 Control Board (X configuration) 1500-2200mAh 3S 11.
6 x Carbon spars, 3 x landing legs, 3 x landing feet, 3 x leg mounts 1 x Center mount 6 x DST engine mounts 1 x bag of assembly fasteners & zip ties
Assembly QUAD Assembly TRI ARMS (Alum, TRI Servo Mount Wood, Carbon) ASM 51416 51417 50444/ 47626 49693 Frame Mount 60 Frame Mount 45 Frame Mount 90 Frame Mount 120 49698 49702 49706 49710 Motor Mount Motor Mount Y Motor Mount Y Motor Mount DST1200 Universal DST1200 Universal 49671 49675 49663 49667 Frame Connector Foot QUAD TRI 49679 49651 49655 T 49687