Use and Care Manual

4>.:990.??30;7@21=:8?30;:B0=>:@=.0
,9/:=?30-,??0=D;,.61=:8?30;:B0=?::7
-01:=08,6492,9D,/5@>?809?>.3,92492
,..0>>:=40>:=>?:=492;:B0=?::7>Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
$?:=04/70;:B0=?::7>:@?:1?30=0,.3:1
.347/=09,9//:9:?,77:B;0=>:9>@91,8474,=
B4?3?30;:B0=?::7:=?30>049>?=@.?4:9>?:
:;0=,?0?30;:B0=?::7Power tools are
dangerous in the hands of untrained users.
,49?,49;:B0=?::7>30.61:=84>,7429809?
:=-49/492:18:A492;,=?>-=0,6,20:1
;,=?>,9/,9D:?30=.:9/4?4:9?3,?8,D
,110.??30;:B0=?::7J>:;0=,?4:91/,8,20/
3,A0?30;:B0=?::7=0;,4=0/-01:=0@>0
Many accidents are caused by poorly
maintained power tools.
00;.@??492?::7>>3,=;,9/.70,9Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
&>0?30;:B0=?::7,..0>>:=40>,9/?::7
-4?>0?.49,..:=/,9.0B4?3?30>049>?=@.?4:9>
?,649249?:,..:@9??30B:=6492.:9/4?4:9>
,9/?30B:=6?:-0;0=1:=80/Use of the
power tool for operations different from those
intended could result in a hazardous situation.
$0=A4.0
,A0D:@=;:B0=?::7>0=A4.0/-D,<@,74140/
=0;,4= ;0=>:9 @>492 :97D 4/09?4.,7
=0;7,.0809?;,=?>This will ensure that the
safety of the power tool is maintained.
-3-
:7/;:B0=?::7>-D49>@7,?0/2=4;;492
>@=1,.0>B309;0=1:=8492,9:;0=,?4:9
B30=0?30.@??492?::78,D.:9?,.?34//09
B4=492:=4?>:B9.:=/Contact with a "live"
wire will make exposed metal parts of the
tool "live" and shock the operator.
&>0.7,8;>:=,9:?30=;=,.?4.,7B,D?:
>0.@=0,9/>@;;:=??30B:=6;40.0?:,
>?,-70;7,?1:=8Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
7B,D>8,60>@=0?30B:=6>@=1,.04>1=00
1=:89,47>,9/:?30=1:=0429:-50.?>
Cutting into a nail can cause the bit and the
tool to jump and damage the bit.
0A0=3:7/?30B:=6;40.049:903,9/,9/
?30?::749?30:?30=3,9/B30949@>0
0A0=;7,.03,9/>90,=:=-07:B.@??492
>@=1,.0 Clamping the material and guiding
the tool with both hands is safer.
0A0=7,D B:=6;40.0 :9?:; :1 3,=/
>@=1,.0>7460.:9.=0?0>?:900?.
Protruding cutting bit may cause tool to jump.
7B,D>B0,=>,10?D2:2270>,9//@>?
8,>6&>0:97D49B077A09?47,?0/,=0,
Using personal safety devices and working in
safe environment reduces risk of injury.
1?0=.3,92492?30-4?>:=8,6492,9D
,/5@>?809?>8,60>@=0?30.:770?9@?,9/
,9D :?30= ,/5@>?809? /0A4.0> ,=0
>0.@=07D?423?090/ Loose adjustment
device can unexpectedly shift, causing loss
of control, loose rotating components will be
violently thrown.
0A0=>?,=??30 ?::7 B309 ?30 -4?4>
092,20/49?308,?0=4,7 The bit cutting
edge may grab the material causing loss of
control of the cutter.
7B,D>3:7/?30?::7B4?3?B:3,9/>
/@=492>?,=?@;. The reaction torque of the
motor can cause the tool to twist.
(309=:@?492:=.@??492?30/4=0.?4:9:1
100/B4?3?30-4?J>.@??4920/2049?:?30
8,?0=4,74>A0=D48;:=?,9?7B,D>100/
?30-4?49?:?308,?0=4,749?30>,80
/4=0.?4:9,>?30.@??4920/204>0C4?492
1=:8?308,?0=4,7When viewing the tool
from the top, the bit rotates clockwise. If the
tool is between the workpiece and your body,
then feed the tool to your right. If the
BIT
WORK
DIRECTION OF
FEED
START
HERE
$;4=,7$,B$,10?D#@70>
RZ 2610011540 07-10:RZ 2610011540 07-10 7/12/10 2:50 PM Page 3