IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Instruction Manual Document Type Page Document title 1 of 15 Docking Station DS-U4WEB with web server version 1 Instruction Manual © 2007; Rotronic AG IN-E-DS-U4WEB-V1_14
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document title Instruction Manual Document Type Page 2 of 15 Table of contents 1 2 2.1 2.2 2.3 2.4 2.5 3 4 5 6 7 8 8.1 8.2 9 10 Overview ................................................................................................................................ 3 Description ............................................................................
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document title 1 Instruction Manual Document Type Page 3 of 15 Overview Docking station model DS-U4WEB allows connection of the HygroLog NT data logger to an Ethernet local area network (TCP/IP) and communication with a PC with the ROTRONIC HW4 software installed.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document title Instruction Manual Document Type Page 4 of 15 2.2 Probe inputs Depending on the model of docking station, the signals from up to 4 additional probes can be processed by the HygroLog NT. These probes can be either HygroClip digital probes or analog probes (including pressure probes).
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Instruction Manual Document Type Page Document title 5 of 15 2.3 Logical inputs (on / off) Several models of docking station allow the HygroLog NT to process up to 2 logical inputs. Typically this is used to monitor a relay contact, a door contact, etc. 2.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Instruction Manual Document Type Page Document title 3 6 of 15 Installation To mount the docking station to a wall, use the two holes shown on the right. The HygroLog NT can then be attached to the docking station as explained below.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document Type Page Document title 4 Instruction Manual 7 of 15 ROTRONIC device configuration certificate ROTRONIC docking stations with an Ethernet interface (both wired and wireless) are shipped with a Device Configuration Certificate that provides information about the factory configuration settings, in particular the TCP/IP settings.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document title 5 Instruction Manual Document Type Page 8 of 15 Baud rate compatibility requirements The default factory Baud rate for both the HygroLog NT and docking stations with Ethernet interface is 57600 bps. Devices with mismatched Baud rate will not communicate together.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document title 7 Instruction Manual Document Type Page 9 of 15 Other configuration settings Either the HW4 software or the Web Server can be used to configure both the HygroLog NT data logger and docking station. Unlike HW4, the Web Server does not generate an authenticated configuration protocol.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document title • 8 Instruction Manual Document Type Page 10 of 15 Avoid separating a matched pair of data logger and docking station, especially when analog probes are used with the docking station.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Instruction Manual Document Type Page Document title 11 of 15 HTML Description Home.htm (Current Values) Rotronic Logo, firmware version, page navigator and current measurement data for the inputs selected in the Web Server Settings page. Automatic refresh rate: 60 seconds. Messwerte.htm This page is similar to Home.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document Type Page Document title HTML Pages Instruction Manual 12 of 15 Description Displays a table showing a directory of the files currently present in the data logger flash card. To display a file (text files only) directly within Internet Explorer, left click on the file Download.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document title Instruction Manual Document Type Page 13 of 15 8.2 Additional information • The Web Server graph data is lost when power is turned off. • When the IP address of the data logger is accesses via Internet, be cautious when synchronizing the data logger time and date with your PC since you may not be in the same time zone as the data logger.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document title 9 Instruction Manual Document Type Page 14 of 15 Performing a flash update Whenever an update is available, a flash update of the docking station internal Ethernet module can be done as explained below: • Be sure to have the IP address of the docking station available (example: 192.168.5.
IN-E-DS-U4WEB-V1_14 Rotronic AG Bassersdorf, Switzerland Document code Unit Docking station DS-U4WEB with web server version 1: instruction manual Document Type Page Document title • Instruction Manual 15 of 15 Wait a few seconds to allow the docking station to go through an automatic reboot. Keep the docking station powered for at least 2 to 3 minutes. Note: to exit the ftp function at any time and return to the command line prompt, type bye. 10 Document releases Release Date Notes _10 Feb.
