operation manual

GB-47
GB
when changing tools, always switch the
machine off and pull the mains plug.
• Donotleavetoolkeysinserted!
Before switching on the machine, check
that keys and adjusters have been re-
moved.
• Useonlyoriginalparts!
You may risk injury by using accesso-
ries or ancillary equipment other than
recommended in the Technical Manu-
al.
Electrical safety
• Payattentiontothecorrectmains
voltage!
Make sure the mains voltage matches
the specications on the rating plate.
• Useasocketoutletwithagroun-
ding contact!
The machine may only be operated
from a socket outlet with a properly in-
stalled grounding contact.
• Extensioncable
The litz wire cross-section of an exten-
sion cable must be at least 1.0 mm
2
. Al-
ways reel out a cable drum fully before
using it. Check the cable for damage.
• Protectionagainstelectricshock
Avoid body contact with grounded
components (such as pipes, heating
radiators, cookers, refrigerators).
• Dangerfromelectricalenergy!
There is electrical equipment inside the
machine. Regularly check the mains
power cable, the extension cables and
the housings of electrical components.
Have damage repaired by an accredi-
ted electrician.
• Protectthemainspowercable!
Do not use the mains power cable for
purposes for which it was not intended.
Do not use the cable to pull the plug
out of the wall socket. Protect the cable
against heat, oil and sharp edges. Ne-
ver work with a damaged power cable.
Storage, care and maintenance
• Keepunusedtoolsinasafeplace!
Unused tools should be kept in a dry,
locked location, out of reach of child-
ren.
• Treattoolswithcare!
Keep tools sharp and clean, and keep
handles dry and clean. This will enable
you to work more efciently and more
safely. Follow the maintenance instruc-
tions and the instructions on tool chan-
ging.
• Repairs by specialist staff Repairs
may only be carried out by a specia-
list workshop or by qualied specialist
staff.