Manual

3. Use a jack to raise the muffler skid into place. Reinstall the two factory bolts on the bumper bracket and tighten with
a 16mm wrench. See Photo 3.
4. Use a pair of vise grips to clamp the front of the muffler skid to the frame cross member. Use the muffler skid as a
drill guide and drill the four 13/32” holes. See Photo 4.
5. Slide the flag nuts on top of the frame cross member and install the supplied 3/8” bolts, washers, and lock washers.
See Photo 5.
6. Tighten the four 3/8” bolts with a 9/16” socket. See Photo 6.
PHOTO 3 PHOTO 4
PHOTO 5 PHOTO 6
Thank you for purchasing a Rough Country muffler skid plate.