Product Manual

Page of 7

Thank you very much for choosing a Roughneck™ Product! For future reference, please

complete the owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire

manual to become familiar with this product before you begin using it.

This machine is designed for certain applications only. The distributor cannot be

responsible for issues arising from modification. We strongly recommend this machine is

not modified and/or used for any application other than that for which it was designed. If

you have any questions relative to a particular application, DO NOT use the machine until

you have first contacted distributor to determine if it can or should be performed on the

product.

For technical questions, please call 1-800-222-5381.

APPLICATION

This tri-stand chain vise is used to hold and work pipe with a chain vise. It is equipped with

tool hangers and a tray for equipment storage during use, pipe benders for bending and

adjusting pipe, and a jackscrew to help stabilize the vise when bending. The vise easily

folds for storage and transportation and allows adjustment of stand stiffness.

TECHNICAL SPECIFICATIONS

Description

Specifications

Rated Pipe Capacity

(1) 2–6in. dia. pipe

Chain Length:

27.55in. (700mm)

Working Height:

36 7/16in.

GENERAL SAFETY REGULATIONS

WARNING: Read and understand all instructions. Failure to follow all

instructions listed below may result in serious bodily injury or death, and/or property

damage.

WARNING: The warnings, cautions, and instructions discussed in this

instruction manual cannot cover all possible conditions or situations that could

occur. It must be understood by the operator that common sense and caution are

factors that cannot be built into this product, but must be supplied by the operator.