Manualshelf

Product Manual

ManualsBrandsRoughneck ManualsFuel Transfer & LubricationPneumatic Oil Extractor — 8-Gallon, 115 PSI
123456
Page 4 of 6
4
Fig.②: Connect compressed air 100psi (7bar) to quick coupler D, Open the ball Valve C. Air will flow out from
the muffler E. When the arrow of the vacuum gauge approaches the red field, after 70-80 seconds, close the
ball valve C, then shut off the compressed air. The aspiration oil is now ready for use.
OIL EXTRACTION
Oils should always be removed when they are hot (158–176°F). The suction capacity of the unit is equal to
2/3 of its reservoir capacity.
Insert the probe into the dipstick tube. Connect the probe to the unit. Open ball valve A, taking care to keep
the probe near the bottom of the sump.