Product Manual

ManualsBrandsRoughneck ManualsFuel Transfer & LubricationLow-Profile Oil Drain — 15-Gallon, 110 Volt, 2.5 GPM Pump, Steel

15GAL STEEL OIL DRAIN WITH

110V PUMP

OWNER’S MANUAL

WARNING:

Read carefully and understand all ASSEMBLY AND OPERATION

INSTRUCTIONS before operating. Failure to follow the safety rules and other

basic safety precautions may result in serious personal injury.

11192013

Item # 42735

Summary of content (6 pages)

PAGE 1
5GAL STEEL OIL DRAIN WITH 110V PUMP OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
PAGE 2
Thank you very much for choosing a Roughneck product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification.
PAGE 3
WORK AREA • Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. • Keep children and bystanders away while operating a low-profile steel oil drain. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area. • Be alert of your surroundings. Using a low-profile steel oil drain in confined work areas may put you dangerously close to cutting tools and rotating parts.
PAGE 4
LOW-PROFILE STEEL OIL DRAIN USE AND CARE • Do not modify the LOW-PROFILE steel oil drain in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which the low-profile steel oil drain was designed. • Always check for damaged or worn out parts before using the LOW-PROFILE steel oil drain. Broken parts will affect the low-profile steel oil drain operation. Replace or repair damaged or worn parts immediately.
PAGE 5
6. 7. Spring Washer(#21) and Washer(#17); Attach the handle onto the Handle Seater (#22), secure with Bolt (#18), Washer(#17) and Lock Nut (#16). Connect the Pressing Plate (#31) to the Reservoir (#19) with Screw (#30) and Filter (#32). Put the Filter Screen (#2) onto the Reservoir (#19). OPERATION WARNING: Follow all safety precautions outlined in this manual and the vehicle manual. 1.
PAGE 6
DIAGRAM & PARTS LIST Ref # 1 Description Handle Qty 1 Ref # 17 Description Washer Qty 3 1 2 Filter Board 1 18 Bolt 3 Long Hose 19 Reservoir 4 Handle Grip 1 2 Bolt 5 Handle Ass’y 1 20 21 1 2 Spring Washer 4 6 Hose Clamp 3 22 Handle Seater 1 7 Connector Ⅰ 1 23 Bolt 8 Screw 2 24 Bearing 2 2 9 Pump 25 Retaining Ring 2 10 11 12 Short Hose Connector Ⅱ Caster 1 1 26 2 1 2 27 28 Wheel Locking Nut Connector Ⅲ 13 Nut 2 29 Cover 2 14 Spring Washer 2 30