Product Manual

Page 10 of 17
Note: Final spring tension adjustment is accomplished by adding wraps of hose around the drum (to
increase tension) or taking off wraps of hose (to decrease tension). Refer to: Adjustment of Spring
Tension.
Figure 2.
Before Each Use
⚠WARNING
 Before connecting a pressure source, ensure that supply pressure does not exceed the maximum
working pressure rating of the reel and hose.
 Ensure that the reel is properly installed before connecting input and output hoses.
 Ensure that the hose reel is in proper working order before use.
 Inspect the hose reel fittings, alignment, hoses and components periodically before use.
 Have damaged or worn components repaired or replaced by an authorized technician.
 Use soap and water when checking for air leaks. Exposure of skin directly to pressurized air or
fluids could result in severe bodily injury, including blood poisoning.
Operating Instructions
⚠WARNING
 Wear the proper protective equipment including ANSI Z87.1 compliant eye protection, non-slip
boots, and gloves.
 Never attach any tool or accessory to the hose unless it is capable of safely operating at the rated
pressure.
 If a leak occurs in the hose or reel, remove system pressure immediately.
 If reel ceases to unwind or rewind, remove system pressure immediately.