5-GALLON OIL DRAIN DOLLY WITH 12 VOLT PUMP OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Roughneck product. For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
• Be alert of your surroundings. Using the low-profile steel oil drain in confined work areas may put you dangerously close to cutting tools and rotating parts. PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when using the low-profile oil drain. Do not use the low-profile steel oil drain while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating the low-profile steel oil drain may result in serious personal injury.
• Distribute the load evenly. Uneven loads may cause the low-profile steel oil drain to tip, resulting in personal injury to the operator or others. • Use the low-profile steel oil drain on flat and level surfaces capable of supporting the low-profile steel oil drain and its maximum load. Pulling or pushing a load on a slanted or uneven surface can result in loss of control. • Store idle low-profile steel oil drain.
into the Reservoir. 3. Once the old engine oil is completely drained, replace the oil drain plug of the engine and refill, if needed. 4. When emptying the old oil from the Reservoir of the Oil Drain, make sure to follow guidelines for engine oil disposal. If necessary, contact your local solid/liquid waste authority for information on recycling and/or disposal. 5. Move the oil drain to where the old oil will be temporary stored (e.g., a tank).
DIAGRAM & PARTS LIST Item No. 1 2 Description Qty. Item No. Filter Board Reservoir 1 1 13 14 Caster Nut 2 2 1 15 Spring Washer 2 1 16 Bolt 1 5 Handle Handle Assembly Handle Grip 2 17 Lock Nut 1 6 7 Long Hose Hose Clamp 1 3 18 19 Bolt Washer 2 4 8 9 Connector I Pump 2 1 20 21 Bearing Retaining Ring 2 2 10 Short Hose 1 22 Wheel 2 11 12 Connector II Screw 1 4 23 Locking Nut 2 3 4 Description Qty.
WARRANTY One-year limited warranty Distributed by Northern Tool + Equipment Co., Inc.
