Product Manual

ManualsBrandsRoughneck ManualsFuel Hose ReelsOil Hose Reel — 1/2in. x 50ft. Hose, 2000 PSI

OIL HOSE AND REELOWNER’S MANUAL

5 Feed new hose through guide and opening in drum, and connect to swivel. Re-install two

hose clamps, on inside and outside of drum flange. Install stopper on other end of hose in the

same position as before.

6 Carefully release the drum latch, and slowly allow the hose to wind onto the reel. Note: Final

spring adjustment is accomplished by adding or removing wraps of hose around the drum.

(Details see spring tension adjustment).

WARNING: Spring Canister Warning. If the rewind spring fails for any reason, for

safety reasons it is strongly recommended that the replacement of the spring canister be

carried out by a qualified service technician.

MAINTENANCE

1. Make sure the hose is in proper working order.

2. Clean the hose with a cloth dipped in warm water to remove dirt or deposits and ensure

correct rewinding.

3. Do not use detergents or solvents, which could cause damage to the hose reel.

4. Dismantling of the unit by unskilled personal could prove hazardous; the risk involved mainly

concerns the preloaded springs. As a result, we strongly recommend that any repairs be

made only by qualified service personnel.

DIAGRAM & PARTS LIST

4 of 5

OIL HOSE AND REELOWNER’S MANUAL

For replacement parts and technical questions, please call 1-800-222-5381

5 of 5

Part No.

Description

Base

Support Plate

Guide Sub-plate

Roller Axle

Roller

Roller Axle

Roller

Nut

Screw

Shaft

Washer

Bolt

Washer

Nut

Retainer

Nut

Washer

Nut

Bolt

Washer

Locking Arm

Spring Dog

Retainer

Screw

Locking Ring

Assembly Hub Bearing

Drum

Bolt

Nut

Q’ty

Part No.

Description

Spring Drum

Spring Core

Spring

Spring Drum

Bolt

Nut

Washer

Retainer

Swivel Spool

O-Ring

Retainer

Swivel Body

Retainer

Fitting

Hose Protection Spring

Hose Assembly

Bumper Block

Screw

Nut

Clamp

Screw

Nut

Protection Cover

Label

Q’ty