Product Manual

ASSEMBLY INSTRUCTIONS
WARNING: Failure to follow these warnings and instructions may result in property
damage or serious bodily injury.
1）Secure the eight 3in. skate-type casters to the two ski dollies, using the eight
spring & flat washers and flange nuts. Attach as shown.
2）Secure the four 2in. skate-type casters to the track dolly, using the four
spring & flat washers and flange nuts. Attach as shown.
GENERAL SAFETY INFORMATION
(1) Load Rating: The total capacity of your dolly set is 1500 lbs. Do not exceed
load rating. Always use caution when using unit at or near capacity.
(2) Do not use set on inclines.
(3) Inspect set thoroughly before operation.
(4) Make sure that all bolts are completely tightened.
(5) Do not operate a damaged dolly until it is completely repaired.