Installation manual

3-6 No Diving or Jumping. Observe all Safety Rules

GENERAL INSTRUCTIONS - ROUND POOLS

ASSEMBLING THE POOL WALL

Secon

B. CONT. ASSEMBLING THE COVE

e. A vacuum cleaner can later be used to remove the air

from between the liner and the wall. This technique

enables you to remove folds in the liner. However the fol-

lowing precautions should be taken:

Do not use an industrial vacuum cleaner which could be

too powerful.

Tape the end of the vacuum hose before inserting it into

the wall so as not to damage the liner.

Insert the nozzle until it is about 4” (10cm) above the

cove (insert through the water return outlet or the skim-

mer depending on the diameter of your hose). Make sure

you will be able to remove the hose later on.

Tape the hose to the wall. (Image 14)

f. Close the skimmer opening with cardboard and adhesive

tape so that the suction of air works better.. (Image 15)