Installation manual
3-7No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL WALL
Secon
3
C. INSTALL THE POOL LINER
1. Set the liner in place
a. Open the carton. Do not use anything sharp to open the
carton.
b. Unpack and unfold the liner and spread it out in the sun
to warm it up. Inspect all the seams and surfaces for
holes.
c. Remove your shoes to avoid damaging the base or tear-
ing the liner.
d. Spread out the liner, smooth side down. The curved
seam should be centred on the cove at the base of the
wall. The other seams will form straight lines across the
bottom of the pool. (Images 16 & 17)
e. Smooth out all the wrinkles in the bottom.
16
17
Important Note:
If possible, unfold the liner on the grass one to two hours
before installation. Be careful not to leave the liner too long or
you may damage the grass.
Important Note:
The liner is generally smaller than the support structure of
the pool. It will stretch more easily when warm. It is important
that the liner is installed on a warm sunny day. AVOID USING
EXTRA COLD WATER AND INSTALLING ON A COLD DAY.