User manual

6
“app_p32MZ.ld” added to the linker folder
before compilation. Each project has its own
linker script inside the src folder.
7- PIN Outs:
The picture on the right shows the pinout of the PingPong board. The table below provides a
description about each pin.
Fig (c)
Pin Number
Pin Name
Pin Description
1
VIN
Input voltage to the board. 9 to 60VDC
2
GND
Ground input to the board
3
1WD
1 Wire data interface
4
1W-GND
1W-GND interface (with isolation)
5
1W-PWR
1W-Power interface (with Isolation)
6
DO4
Digital output (PMOSFET) – outputs voltage equal VIN when triggered
7
DO2
Digital output (NMOSFET) - outputs GND when triggered
8
DO1
Digital output (PMOSFET) – outputs voltage equal VIN when triggered
9
DO3
Digital output (NMOSFET) - outputs GND when triggered
10
AI2
Analog input 2. 0-30 VDC input with 10 bits resolution
11
DI1
Digital Input 1. 0.7 to 30VDC DC to trigger a logic 1
12
DI2
Digital Input 2. 0.7 to 30VDC DC to trigger a logic 1
13
DI4
Digital Input 4. 0.7 to 30VDC DC to trigger a logic 1
14
DI3
Digital Input 3. 0.7 to 30VDC DC to trigger a logic 1
15
AI1
Analog input 1. 0-30 VDC input with 10 bits resolution
16
IGND
Ground from the isolated part of the current measurement circuit
17
CI1+
Current input 1 + (4-20mA current measurement with isolation)