User manual

#pragma config FSLEEP = OFF

#pragma config DBGPER = PG_ALL

#pragma config EJTAGBEN = NORMAL

#pragma config CP = OFF

/*** DEVCFG1 ***/

#pragma config FNOSC = SPLL

#pragma config DMTINTV = WIN_127_128

#pragma config FSOSCEN = OFF

#pragma config IESO = OFF

#pragma config POSCMOD = EC

#pragma config OSCIOFNC = OFF

#pragma config FCKSM = CSDCMD

#pragma config WDTPS = PS1048576

#pragma config WDTSPGM = STOP

#pragma config FWDTEN = OFF

#pragma config WINDIS = NORMAL

#pragma config FWDTWINSZ = WINSZ_25

#pragma config DMTCNT = DMT31

#pragma config FDMTEN = OFF

/*** DEVCFG2 ***/

#pragma config FPLLIDIV = DIV_3

#pragma config FPLLRNG = RANGE_5_10_MHZ

#pragma config FPLLICLK = PLL_POSC

#pragma config FPLLMULT = MUL_50

#pragma config FPLLODIV = DIV_2

#pragma config UPLLFSEL = FREQ_24MHZ

#pragma config UPLLEN = ON

/*** DEVCFG3 ***/

#pragma config USERID = 0xffff

#pragma config FMIIEN = OFF

#pragma config FETHIO = ON

#pragma config PGL1WAY = ON

#pragma config PMDL1WAY = ON

#pragma config IOL1WAY = ON

#pragma config FUSBIDIO = OFF

/*** BF1SEQ0 ***/

#pragma config TSEQ = 0xffff

#pragma config CSEQ = 0xffff

To check the various Harmony configurations used, please open the MPLAB Harmony Configurator

from within MAPLABX, which is found under Tools Embedded. All the files related to RTOS, TCPIP,

USB CDC, SQI, UART, SPI, and I2C are added to the code automatically by MAPLAB Harmony. The

Ping Pong board uses the chip LAN8740A from Microchip as Ethernet Transceiver, SST26VF032 from

microchip as the flash memory, MCP3910 for 4-10 ma Current measurement, FXOS8700CQ from