Datasheet
Page
2
/ 2
Version 1.
3
PingPong Datasheet
Round Solutions
GmbH & Co KG
Hans-Boeckler-Strasse 16,
63263 Neu-Isenburg, Germany
Tel. +49 (0) 6102 799 28 0
Fax +49 (0) 6102 799 28 199
info@roundsolutions.com
www.roundsolutions.com
Product
Features
• IoT Gateway with wired and wireless communication
channels and interfaces
• Extendable through an unlimited number of Plug’n’Play
hardware extension boards
• Wireless communication: Telit xE910 cellular family
o 2G, 3G and 4G²
• High Performance GNSS: Telit SL869
o GPS, Glonass, Galileo
o For Tracking, Timing³ and Dead Reckoning³
• 2x SIM card holder and SIM on chip
• Hardware Watchdog for the microcontroller
• Configurable over Ethernet, USB and/or SMS
• Out of the box connectivity with
o Cumulocity IoT Cloud Platform
o Telit m2mAIR Cloud
• TCP and UDP Data Protocols
• Accelerometer on board
• Magnetometer on board (for the detection of
geographically north)
• RTOS Version:
o World’s fastest 32-bit Microcontroller with 200
MHz, 512 KB RAM and 2 MB Flash Memory
(Microchip PIC32MZ)
o Additional 4 MB Flash Memory
• Linux Version:
o Using Microchip’s PIC32MZ DA
o Specifications to be announced
Data
LTE
• Uplink up to 50 Mbps
• Downlink up to 100 Mbps
HSPA+
• Uplink up to 5.75 Mbps
• Downlink up to 42.0 Mbps
UMTS
• Uplink/Downlink up to 384 kbps
GSM/GPRS
• Uplink/Downlink up to 9.6 kbps
•
Environmental
• PCB Dimensions 85 x 52 x 23mm
• Extended temperature range -40°C to +85°C
• Enclosures (optional)
o IP53
o IP67
• Power Management
o 9-60V DC input
o 3.6V AUX output
• Max. current consumption
o 900mA
• Approvals
o CE
Interfaces
• 2 x Connectors for unlimited stackable extension boards.
These connectors feature:
o UART
o SPI
o CAN
o I²C
• 1 x Ethernet interface
• 1 x USB interface
• 1 x CAN interface
• 2 x Frequency inputs
• 2 x Analog inputs
• 4 x Three state logic inputs (Dig.Inputs)
• 4 x NMOSFET outputs (Dig.Outputs)
• 2 x Current measurement inputs (24 bits resolution with
galvanic isolation)
• 1 x 1-Wire interface
• Antenna Connectors
o GSM: U.FL Connector
o GNSS: U.FL Connector
Order Code
• RTOS Version EVK-PCB-HEDGN-R1501
•
Linux Version EVK-PCB-HEDGN-L1501
Firmware &
Software
The RTOS version uses C/C++ and Python and comes
with USB CDC Bootloader. The Linux version offers even
wider possibilities such as Open VPN, IPSEC tunnels e.g.
for Router functionality. Both versions are available as
open source software and compatible with MPLAB
Harmony.
Round Solutions offers ready-made software Packages and
libraries for the PingPong boards:
• Remote Metering
• Asset Tracking
• Wi-Fi/Bluetooth Gateway
• MODbus over TCP
• MODbus over RS485
² LTE version, ³ optional, our sales team will consult,
*coming soon for 4G
Extension Boards
The PingPong Board has two extension connectors: One
that provides power (3.3V / 3.8V) and one communication
buses connector. The Communication buses are: UART,
SPI, CAN and I²C.
Just stack one or more of the following extension boards
on top of the base board and the device is ready to use.
• Wi-Fi/Bluetooth: with webserver on board
• I/O & Serial Board: 10 digital/10 analog/4 frequencies,
RS485, RS232
• Satellite communication: Iridium
• ISM/RF:433MHz/868MHz/915MHz/2.4GHz
• NFC/RFID: Protocol EPCglobal Gen 2 (ISO 18000-6C)
• Sigfox/LoRa: Ultra low power transceiver
• Still image and video camera