Full Product Manual
ASSEMBLY INSTRUCTIONS
Assemble Pump Handle
Slide handle onto shaft and line up holes. Thread bolt through handle
and shaft and securely tighten. Thread on lock nut and tighten using
a 13mm (or adjustable) wrench. Handle can be mounted on left or
right depending on user preference. (See Figure D)
Assemble Extension, Shut-O, Nozzle and Spray
Optimizer
1. Install the extension “wand” onto the shut-o
assembly and tighten the nut securely. (See Figure A)
2. (Optional) Install Spray Optimizer for low pressure (low
drift) applications. This will help prevent weed killer
formulas from drifting into undesired areas. (Do not
over tighten, actual position will vary. See Figure B)
3. Install selected nozzle onto the end of the extension
or optimizer (if installed) and tighten securely.
(See Figure C)
Figure A
Figure B
(Optional)
Figure C
Figure D
Folding Handle (included on some models)
1. Thread bolt through handle
and shaft as stated above.
2. Snap strap around
handle.
3. Handle shown in
folded position.
Page 3
SELECT USING NOZZLE CHART BELOW
(Nozzle selections vary by model)
A. Cap Nut
B. Foaming Nozzle
C. Red High-Volume Fan Nozzle
D. Yellow Low-Volume Fan Nozzle
E. Adjustable Cone Nozzle
F. Flat Seal
G. Adapter
H. Extension
E
A
G
B
C
F
H
D
ADJUSTABLE CONE USES:
Spot spraying in or around flower
beds, trees, and shrubs.
Edging along fences, driveways,
and walkways.
Killing brush such as poison ivy,
poison oak, kudzu and wild
blackberry.
Preparing garden beds for planting
of ornamentals and vegetables.
For precision spraying in confined
areas such as gardens and flower
beds.
FAN NOZZLE USES:
Lawn replacement. Kill lawn and
weeds before planting a new lawn.
Preparing large areas for planting
of ornamental and vegetable
gardens.
RED HIGH VOLUME YELLOW LOW VOLUME
FAN NOZZLE USES:
FOAMING NOZZLE USES:
Spot spraying in flower beds,
walkways, driveways, and patios,
around trees and shrubs.
Edging along fences, driveways and
walkways.
Killing brush such as poison ivy,
poison oak, kudzu and wild
blackberry.