User Guide
ASSEMBLY INSTRUCTIONS
Assemble Hose To Tank
IMPORTANT: Do not attempt to heat or alter hose,
hose nut, or barb prior to assembly.
1. Align hose barb tabs, push hose barb into tank
until it stops (See Figure A).
2. Slide hose nut into place and turn clockwise to
tighten. (See Figure B).
NOTE: Do not use tools to tighten hose nut.
Figure A
Figure B
Assemble Extension, Shut-O & Nozzle
1. Install the extension onto the shut-o
assembly and tighten the nut securely.
(See Figure C)
2. Install selected nozzle onto the end of the
extension and tighten securely. (See Figure D)
Figure D
Figure C
SELECT USING NOZZLE CHART BELOW
Page 3
A. Adjustable Nozzle
B. Max Volume Fan Nozzle (Brown)
C. High Volume Fan Nozzle (Red)
D. Low Volume Fan Nozzle (Yellow)
E. High Performance Foaming Nozzle
F. Cap Nut
G. O-Ring (pre-assembled to extension)
H. Extension
H
C
B
A
G
F
D
Also accepts TeeJet® tips
A. ADJUSTABLE NOZZLE USES:
MAX VOLUME (BROWN)
FAN NOZZLE USES:
HIGH VOLUME (RED)
FAN NOZZLE USES:
LOW VOLUME (YELLOW)
FAN NOZZLE USES:
HIGH PERFORMANCE
FOAMING NOZZLE
Spot spraying in or around
ower beds, trees, and shrubs.
Edging along fences, driveways,
and walkways.
Killing weeds.
Feeding ornamentals and
vegetables.
Sealing decks, fences, and
siding.
Killing mold and mildew on
roofs and siding.
Cleaning decks, fences,
and siding.
Cleaning concrete.
For broad coverage of
large areas like lawns.
Control insects.
For precision spraying in
conned areas such as gardens
and ower beds.
B.
C.
D.
E.
E
Foaming / Cleaning
High volume fan- Flat
spray for broad coverage.
Note: Only available on certain models.
Note: Only available on certain models.
NOZZLE SELECTION VARIES BY
MODEL PURCHASED (NOZZLES
INCLUDED WITH YOUR SPRAYER
ARE SHOWN ON CARTON).