User Guide

Page 4
INSTRUCTIONS FOR USE
IMPORTANT: Wear old clothing that you do not mind getting dirty. Gloves, glasses, and other
protective clothing should always be worn when using this sprayer for deck applications.
ALWAYS CLEAN THE SPRAYER AND SHUT-OFF THOROUGHLY AFTER EACH USE OR
WHEN CHANGING APPLICATIONS AS DESCRIBED IN THE CLEANING THE SPRAYER
SECTION. FAILURE TO COMPLETELY CLEAN MAY CAUSE CROSS-CONTAMINATION.
Deck Cleaning: HIGH VOLUME (RED) FAN NOZZLE
This nozzle is used to clean dirt, mildew & algae stains from composite and natural wood
decking.
Items needed: Smith Decks Sprayer with fan nozzles, sti-bristled brush, pressure
washer or garden hose.
Recommended directions for use:
1. Remove existing deck furniture and sweep any loose debris from the deck to be cleaned.
2. Wet any grass or existing ornamentals near the deck so that any eects of run-o will be
diluted, or cover with plastic.
3. Fill the tank to the desired level using the ll markings on the side of the tank. Be sure to
refer to the chemical manufacturer instructions for the proper mixture, taking care to stir
and dissolve the chemical well.
4. Apply even coat to deck and use a sti-bristled brush to scrub the cleaner into the wood
with the grain. If cleaning a large area, it may be easier to split the job into smaller, more
manageable sections.
5. When done, rinse well with water from a garden hose or pressure washer to remove all
excess cleaner.
6. ALWAYS CLEAN THE SPRAYER AND SHUT-OFF THOROUGHLY AFTER EACH USE OR WHEN
CHANGING APPLICATIONS AS DESCRIBED IN THE CLEANING THE SPRAYER SECTION.
FAILURE TO COMPLETELY CLEAN MAY CAUSE CROSS-CONTAMINATION.
Brightening: MAX VOLUME (BROWN) & HIGH VOLUME (RED)
FAN NOZZLES
To be done after deck cleaning step. This process will improve the appearance of UV damaged
wood.
Items needed: Smith Decks Sprayer with fan nozzles, sti-bristled brush, pressure
washer or garden hose.
Recommended directions for use:
1. Wet any grass or existing ornamentals near the deck so that any eects of run-o will be
diluted, or cover with plastic.
2. Fill the tank to the desired level using the ll markings on the side of the tank. Be sure to
refer to the chemical manufacturer instructions for the proper mixture, taking care to stir
and dissolve the chemical well.
3. Apply even coat to deck and use a sti-bristled brush to scrub the brightener into the wood
with the grain. If using brightener on a large area, it may be easier to split the job into smaller,
more manageable sections.
4. When done, rinse well with water from a garden hose or pressure washer to remove all
excess brightener.
5. ALWAYS CLEAN THE SPRAYER AND SHUT-OFF THOROUGHLY AFTER EACH USE OR WHEN
CHANGING APPLICATIONS AS DESCRIBED IN THE CLEANING THE SPRAYER SECTION.
FAILURE TO COMPLETELY CLEAN MAY CAUSE CROSS-CONTAMINATION.