User manual

Activating ViewRanger Software and Maps
You have 16 days to activate ViewRanger software after you first use it. During
those 16 days it is fully functional, so can be used as a trial without being
activated.
To activate you need the serial number, which is provided:
• By email for software and maps purchased by download
• On the rear of the instruction sheet provided with CDs / DVDs
• On the rear of the memory card case
There are two ways to activate ViewRanger:
1. From within ViewRanger choose Options > Activate. ViewRanger will
connect to the server to activate using an Internet connection.
2. Use a web browser visit www.viewranger.com/activation and enter your
details.
You will need the phone’s IMEI number. The
IMEI is 15 digits long, and may be shown with
hyphens.
To get the IMEI, run ViewRanger and choose
Enter license key from the Options menu.
You can also get the IMEI of the phone by
dialling *#06#
Once you have entered your details you will
be given a license key. Choose Enter license
key from the main menu, enter the license
key and then press OK.
The same license key can be used more than once if you need to install on
more than one memory card, but each memory card will have its own set of
Settings.
14