User Manual

Time-Lapse 1fps & G-Sensor: (See how this feature works)

When this feature is set to ON and ROVE’s 3-Lead Hardwire

Kit is installed properly.

Then, when you turn OFF the car’s engine and turn the key

to the lock position.

Then the camera will STOP the continuous video recording

and it will go into the timelapse 1fps recording mode

automatically.

Now while this timelapse is being recorded, If someone hits

your car and if the impact reaches the set G-Sensor level, then

the camera will stop the timelapse video > then it will start to

record 1-min continuous video, save & lock that video in RO

folder > then return to recording the timelapse 1fps.

USER MANUAL

NOTE

Now when you start your car for the next time, the camera

will automatically STOP the timelapse 1fps & G-Sensor

parking mode. Then it will go into normal video mode

automatically to start the continuous video recording.

(When the Parking Mode got activated, the camera will give you

voice alert stating “Parking Mode got activated while you were

away” when you turn ON your car the next time. If you hear this,

you should check the locked videos to see what happened.)