User`s guide

RN-WIFLYCR-UG
www.rovingnetworks.com Version 1.2r 4/30/13 page 36
2.4.4 get dns
This command displays the DNS settings.
Example: get dns // Show the DNS information
2.4.5 get everything
This command displays all of the configuration settings, which is useful for debugging.
Example: get everything // Show all configuration settings
2.4.6 get ftp
This command displays the FTP settings.
Example: get ftp // Show the FTP settings
2.4.7 get ip <char>
This command displays the IP address and port number settings, where <char> is the
optional parameter a. Using <char> returns the current IP address.
Example: get ip a // Display the current IP address
2.4.8 get mac
This command displays the device’s MAC address.
Example: get mac // Show the MAC address
2.4.9 get option
This command displays the optional settings such as the device ID.
Example: get option // Show the optional settings
2.4.10 get sys
This command displays the system settings, sleep and wake timers, etc.
Example: get sys // Show the system settings
2.4.11 get time
This command displays the time server UDP address and port number.
Example: get time // Show the time server information
2.4.12 get wlan
This command displays the SSID, channel, and other WLAN settings.
Example: get wlan // Show the WLAN settings
2.4.13 get uart
This command displays the UART settings.
Example: get uart // Show the UART settings