UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Rev. 04 — 12 October 2009 User manual Document information Info Content Keywords isp1362; pxa250; pxa25; otg; on-the-go; usb; universal serial bus Abstract This document describes the ISP1362 OTG add-on eval kit for Intel PXA250/255 IDP rev. 04.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Revision history Rev Date Description 04 20091012 Rebranded to the ST-Ericsson template. 03 20090203 Rebranded to the ST-NXP Wireless template. 02 20030601 Updated Table 1. Added PXA255. 01 20030501 First release. Contact information For additional information, please visit: http://www.stericsson.com For document related queries, please send an email to: wired.support@stericsson.com UM10032_4 User manual © ST-ERICSSON.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 1. Introduction The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) Controller, Host Controller (HC) and Device Controller (DC). • The OTG controller is fully compliant with On-The-Go Supplement to the USB 2.0 Specification Rev. 1.0a. • The host controller is fully compliant with Universal Serial Bus Specification Rev. 2.0; supporting data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s).
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 2. Top view of the ISP1362 OTG add-on car d for PXA250/255 IDP Fig 3. Side view of the ISP1362 OTG add-on card for PXA250/255 IDP UM10032_4 User manual © ST-ERICSSON. All rights reserved. Rev.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 4. Bottom view of the ISP1362 OTG add-on card for PXA250/255 IDP 2. System requirements • Two BSQUARE Linux IDP boards (version 2 or later) with the ISP1362 OTG add-on cards attached. • One OTG cable. • A USB speaker. Fig 5. BSQUARE IDP version 2 UM10032_4 User manual © ST-ERICSSON. All rights reserved. Rev.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 6. BSQUARE IDP version 4 3. Installation 1. Copy the nk.bin file to a CompactFlash (CF) memory unit, and firmly insert the ISP1362 OTG add-on card for the PXA250/255 IDP into connector J13 on the BSQUARE IDP board. 2. Insert a PC card adapter with CF into either of the PC card slots in the BSQUARE IDP. 3. Switch ON the BSQUARE IDP, and wait for the CF memory to be reprogrammed. 4. Eject the PC card to reboot the BSQUARE IDP.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 7. Setup of the ISP1362 OTG add-on card for PXA250/255 IDP 3.2 Power supply and LED indicators In the ISP1362 OTG add-on evaluation card, the power supply inputs, +3.3 V and +5.0 V, come from the IDP. Therefore, no other external power supply input or on-board power regulation is required. There are LEDs on the board to indicate the power supply status: • D1 is the +3.3 V indicator. • D2 is the +5.0 V indicator.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Jumper Description JP3 ID pin select Setting Open (use ID from connector) [default] Short (force ID to zero) Fig 8. ISP1362 OTG add-on card on the PXA250/255 IDP 4. ISP1362 bill of materials Table 2. Bill of materials Quantity Part reference Description 9 C2, C5, C6, C9, C10, C16, C17, C21, C22 12 Rating Manufacturer Capacitor, SMD MLC, 0.01 μF, ±10% 0.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Quantity Part reference Description Value Rating Manufacturer 100 μF 16 V AVX μF, 16 V, TAJ A-CASE 1 C30 Capacitor SMD, tantalum chip, 100 μF, 16 V, TAJ D-CASE 2 C3, C4 Capacitor SMD, tantalum chip, 47 μF, 47 μF 16 V, TAJ D-CASE 16 V AVX 1 U6 ISP1362 USB OTG controller - - ST-Ericsson 2 JP1, JP3 Header – 1 x 2 .025SQ PIN .100 centers - - Generic 1 JP2 Header – 2 x 3 .025SQ PIN .
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Quantity Part reference 7 Description Value Rating Manufacturer R6, R7, R8, R14, R15, R16, Resistor, SMD, fixed, film, chip, 100 R23 K, ±5%, 1/16 W, 0603 100 K 1/16 W Generic 2 R18, R21 Resistor, SMD, fixed, film, chip, 15.0 K, ±5%, 1/16 W, 0603 15 K 1/16 W Generic 2 R1, R24 Resistor, SMD, fixed, film, chip, 470 Ω, ±5%, 1/16 W, 0603 470 1/16 W Generic 2 R11, R12 Resistor, SMD, fixed, film, chip, 4.
UM10032_4 User manual UM10032 11 of 21 © ST-ERICSSON. All rights reserved. ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Rev. 04 — 12 October 2009 Fig 9.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 10. BSQUARE IDP high-speed expansion connector – part 1 (page 3) UM10032_4 User manual © ST-ERICSSON. All rights reserved. Rev.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 11. BSQUARE IDP high-speed expansion connector – part 2 (page 3) UM10032_4 User manual © ST-ERICSSON. All rights reserved. Rev.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 12. BSQUARE IDP high-speed expansion connector – part 3 (page 3) UM10032_4 User manual © ST-ERICSSON. All rights reserved. Rev.
UM10032_4 User manual UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Rev. 04 — 12 October 2009 15 of 21 © ST-ERICSSON. All rights reserved. Fig 13.
UM10032_4 User manual For DMA accesses, use the following address ranges. This will generate the DMA Acknowledge signals needed. Processor uses CS2#. PIO Address Map: 0000 0000h to 00FF FFFFh. DMA Channel 0 Address Map: 0200 0000h to 02FF FFFFh. DMA Channel 1 Address Map: 0100 0000h to 01FF FFFFh. UM10032 16 of 21 © ST-ERICSSON. All rights reserved. ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Rev. 04 — 12 October 2009 Fig 14.
UM10032_4 User manual UM10032 17 of 21 © ST-ERICSSON. All rights reserved. ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Rev. 04 — 12 October 2009 Fig 15.
UM10032_4 User manual UM10032 18 of 21 © ST-ERICSSON. All rights reserved. ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Rev. 04 — 12 October 2009 Fig 16.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 6. References [1] ISP1362 Single-chip USB On-The-Go controller data sheet [2] ISP1362 Linux Stack user manual [3] Universal Serial Bus Specification Rev. 2.0 [4] On-The-Go Supplement to the USB 2.0 Specification Rev. 1.0a [5] Intel PXA250 Applications Processor Integrated Development Platform User’s Guide from BSQUARE (linux_user_guide_EUG-0004-0001B.pdf) UM10032_4 User manual © ST-ERICSSON. All rights reserved. Rev.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 7. Legal information Please Read Carefully: The contents of this document are subject to change without prior notice.
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 8. Contents 1. 2. 3. 3.1 3.2 3.3 4. 5. 6. 7. 8. Introduction ......................................................... 3 System requirements .......................................... 5 Installation ........................................................... 6 Setting up the Integrated Development Platform (IDP) ................................................................... 6 Power supply and LED indicators ......................