PowerPress Instructions for Use D E F G H C B I J A M K L n Rowenta Werke GmbH 63016 Offenbach am Main F G H I J K L M Auto-off indicator light Flexible cord protector Power cord Pilot light Temperature control dial Stainless steel soleplate Transparent water tank Water level indicator Reference 110 347 4310 Description: A Spray nozzle B Water filling inlet C Variable steam control with self clean system D Spray button E Burst of steam button / Pro Vertical steam (depending on model)
IMPORTANT SAFETY INSTRUCTIONS When using your iron, basic safety precautions should always be followed, including the following: Read all instructions before using the iron. 1. Use appliance only for its intended use. 2. To protect against a risk of electric shock, do not immerse the appliance in water or other liquids. 3. The appliance should always be turned to Minimum (Min) before plugging or unplugging from outlet. Never yank cord to disconnect from outlet, instead grasp plug and pull to disconnect. 4.
BEFORE USE M M M Please read the instructions for use and the Important Safeguards carefully. Remove the sticker or transparent soleplate protector. It is normal for a small amount of smoke to be produced the first time the iron is used. This will quickly disappear. 1 3-WAY AUTO-OFF If the iron is not moved while it is 1 30 sec. plugged in, an internal safety switch CA VERTI L VE R TICAL 8 min. 30 sec. will turn it off.
Laundry label Fabric Temperature setting Synthetics Viscose Polyester l (low temperature) Silk Wool ll (medium temperature) Cotton Linen lll (high temperature) To avoid an automatic switch off while the iron is heating up, always keep the iron on its heel. Start at a low temperature and graduate to a high temperature. For delicate fabrics we recommend carrying out a test on an unobstrusive part of the garment (inner seam).
6 BURST OF STEAM 6 M M M M To remove stubborn wrinkles or press in a sharp crease, use the burst of steam button. Press the button firmly, a strong burst of steam penetrates deep into the fabric. Leave an interval of at least four seconds between pressing the burst of steam button. With water in the tank, the burst of steam button can be used as soon as the steam ironing temperature has been reached (lll). 7 VERTICAL STEAM M 7 M The iron can also be used vertically.
9 DRY IRONING M 8 9 min Slide the variable steam control fully to the left. We recommend dry ironing with an empty water tank to be sure there are no drips. Self max Clean AFTER IRONING M M M Unplug the iron. Slide the variable steam control to max. and empty any water left in the tank. Then set the variable steam control to min. and leave the iron to cool. For easy storage, the cord can be wound loosely around the heel once the iron has cooled down completely.
J SELF CLEANING M 9 J min Your iron is equipped with two self clean functions. Self max Clean Vapodur Valve M M The patented Vapodur valve ensures that the opening which allows the water to drip from the tank into the steam chamber remains unaffected by hard water deposits. To ensure that your iron continues to steam efficiently the valve MUST be opened and closed a few times after each use. This is done by moving the variable steam control left to right a few times.
CLEANING AND MAINTENANCE M When cold and unplugged, the iron can be cleaned with a damp cloth and wiped dry. Never use household cleaners or solvents. Cleaning the soleplate Rowenta soleplates have excellent non-stick properties and can be simply wiped clean when cold. M In normal use a draggy coating may build up on the soleplate (starch, detergent buildup, burnt synthetic fibers).
In the interest of improving products, Rowenta reserves the right to change specifications without prior notice. LIMITED WARRANTY All Rowenta products are warranted for 1 year from date of purchase against defects in material and workmanship. During this period, any Rowenta product that, upon inspection by Rowenta, is proved defective, will be repaired or replaced, at Rowenta's option, without charge to the customer.
