103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page1 1103910403 - 08/13
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page2 EN FR DW9240 RU UK TR PL CS SK SL SR HR RO BG HU ET LV LT www.rowenta.
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page3 EN FR 3 RU 2 UK TR 4 PL 5 CS 6 SK 8 SL 7 9 1 10 SR HR RO 11 12 BG 13 HU 14 15 HIGH PRECISION TIP ET LV LT EN ..................5 FR.................11 RU................17 UK ................23 TR ................29 PL .................35 CS ................41 SK ................47 SL.................53 SR ................59 HR ................65 RO................71 BG................77 HU................83 ET.................
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page4 fig.1 fig.2 fig.3 fig.4 fig.5 fig.6 LINEN COTTON WOOL SILK NYLON AUTO OFF fig.7 LINEN COTTON WOOL SILK NYLON AUTO OFF fig.
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page4 fig.9 fig.10 LINEN COTTON WOOL SILK NYLON AUTO OFF fig.12 fig.11 1 min. fig.13-a fig.14 fig.
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page5
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page1 SAFETY INSTRUCTIONS • Please read these instructions carefully and keep them for further references. • Never leave the appliance unattended when it is connected to a power source; if it has not cooled down for approximately 1 hour. • The iron must be used and rested on a flat, stable, heat-resistant surface. • When you place the iron on the iron rest, make sure that the surface on which you place it is stable.
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page2 IMPORTANT RECOMMANDATIONS • The voltage of your electrical installation must correspond to that of the iron (220-240V). Always plug your iron into an earth socket. Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee. • If you are using a mains extension lead, ensure that it is corrected rated (16A) with an earth, and is fully extended.
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page3 DESCRIPTION EN 1. LED screen 2. 3. 4. 5. 6. 7. 8. Water tank 9. Self clean button 10. Spray 11. High precision tip 12. Soleplate 13. Filling inlet 14. Temperature control dial 15.
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page4 FABRIC THERMOSTAT THERMOSTAT IRONING INDICATION LABEL Nylon (Synthetic fibres, e.g. viscose, polyester) NYLON silk SILK wool WOOL cotton COTTON linen LINEN LINEN COTTON WOOL SILK NYLON AUTO OFF IMPORTANT The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature. For mixed fabrics set the temperature for the most delicate fabric.
03910403 DW9240 F1_110x220mm 30/04/13 08:55 Page5 7 • Spray Press the spray button to moisten difficult creases fig.10. You can use the spray function at any temperature. 8 • Anti-Drip system It prevents water dripping out of the soleplate when the temperature is too low. 9 • Auto Off function • For your safety, the electronic system cuts off the power and the auto off indicator light flashes fig.
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page6 PROBLEMS Problem Cause Solution No mains supply. Check that the mains plug is properly inserted or try plugging the iron into a different socket. Temperature control set too low. Set the temperature control to a higher temperature. The automatic electronic auto off is active. Move your iron. Thermostat control light goes on and off This is normal. When the thermostat control light goes on and off the iron is heating up.
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page103 ikti 103
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page104 104
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page105 105
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page106 106
1103910403 DW9240 F1_110x220mm 30/04/13 08:55 Page107 107
