103910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page1 1103910393/02 - 05/15
1103910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page2 EN FR DW9240 DW9245 DE NL IT ES PT EL SV NO FI DA AR H www.rowenta.
1103910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page3 EN FR 3 DE 2 NL IT 4 5 ES PT 6 EL SV 7 8 1 9 NO FI DA 10 11 AR 12 13 14 HIGH PRECISION TIP EN.............................5 FR ...........................11 DE...........................17 NL...........................23 IT ............................29 ES ...........................35 PT ...........................41 EL ...........................47 SV...........................53 NO ..........................59 FI......
1103910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page4 fig.1 fig.2 fig.3 fig.4 fig.5 fig.6 LINEN COTTON WOOL SILK NYLON AUTO OFF fig.7 LINEN COTTON WOOL SILK NYLON AUTO OFF fig.
1103910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page4 fig.9 fig.10 LINEN COTTON WOOL SILK NYLON AUTO OFF fig.12 fig.11 1 min. fig.13-a fig.14 fig.
1103910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page1 SAFETY INSTRUCTIONS • Please read these instructions carefully and keep them for further references. • Never leave the appliance unattended when it is connected to a power source; if it has not cooled down for approximately 1 hour. • The iron must be used and rested on a flat, stable, heat-resistant surface. • When you place the iron on the iron rest, make sure that the surface on which you place it is stable.
1103910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page2 IMPORTANT RECOMMANDATIONS • The voltage of your electrical installation must correspond to that of the iron (220-240V). Always plug your iron into an earth socket. Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee. • If you are using a mains extension lead, ensure that it is corrected rated (16A) with an earth, and is fully extended.
1103910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page3 DESCRIPTION EN 1. LED screen 2. 3. 4. 5. 6. 7. 8. Self clean button 9. Spray 10. High precision tip 11. Soleplate 12. Filling inlet 13. Temperature control dial 14.
1103910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page4 THERMOSTAT FABRIC THERMOSTAT IRONING INDICATION LABEL Nylon (Synthetic fibres, e.g. viscose, polyester) NYLON silk SILK wool WOOL cotton COTTON linen LINEN LINEN COTTON WOOL SILK NYLON AUTO OFF IMPORTANT The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature. For mixed fabrics set the temperature for the most delicate fabric.
1103910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page5 7 • Spray EN Press the spray button to moisten difficult creases fig.10. You can use the spray function at any temperature. 8 • Anti-Drip system It prevents water dripping out of the soleplate when the temperature is too low. 9 • Auto Off function • For your safety, the electronic system cuts off the power and the auto off indicator light flashes fig.
03910393/02 DW9240 DW9245 D1_110x220mm 29/01/15 14:14 Page6 PROBLEMS Problem Cause Solution The iron is plugged in, but the soleplate of the iron remains cold. No mains supply. Check that the mains plug is properly inserted or try plugging the iron into a different socket. Temperature control set too low. Set the temperature control to a higher temperature. The automatic electronic auto off is active. Move your iron. Temperature control set too low.
