NOT 015998 EP304 expertise 015998/02-04 EP304 29/01/04 13:19 Page 1 Instruction for use
NOT 015998 EP304 expertise 29/01/04 13:19 Page 2 Please read carefully before use GB 1- DESCRIPTION OF YOUR APPLIANCE 1. Depilator head 2. Hair guides 3. Massaging beads 4. Tweezers 5. 2-speed-and stop switch 6. Adaptor 7. Cleaning brush 1 5 Pain-free function: Your appliance is equipped with a roller beads massaging system integrated into the depilation head. The roller beads massage the skin to reduce the sensation of pain linked to depilation.
NOT 015998 EP304 expertise 29/01/04 13:19 Page 3 2 - SAFETY GB Voltage : Ensure that this voltage corresponds to that of your mains supply. Incorrect connection may cause irreparable damage which is not covered by the guarantee. • This appliance is intended for personal domestic use only. • It must only be used with the enclosed adaptor EM2A1 or EM2A2.
NOT 015998 EP304 expertise 29/01/04 13:19 Page 4 3. PREPARATION OF THE SKIN • Your skin must be clean and dry. • Do not apply either cream or hydrating milk before depilation. • If you previously used a razor for depilation: - the first few times you use the depilator, your skin may feel more sensitive, as shaving has made your hair thicker and stronger. This sensation will lessen the more you use your depilator : the hair will grow back less quickly and become thinner.
NOT 015998 EP304 expertise 29/01/04 4. CONNECTION 2 1 5. STOPPING THE APPLIANCE 2 1 6. LEG HAIR REMOVAL - Move the switch to the on position “• • “. - The switch must always remain visible during use. - Shave against the lie of the hair, slowly and without pressing, with the shaver perpendicular to your skin.
NOT 015998 EP304 expertise 29/01/04 13:19 Page 6 7. CLEANING THE APPLIANCE - For more thorough cleaning, clean the tweezers with a cloth soaked in alcohol, turning the depilation head manually. 8. SKIN CARE Small red spots may appear. They will disappear quickly. For s preferable to use your depilator in the evening. If necessary, apply calming cream after depilation. 9. PROTECTION OF THE ENVIRONMENT At the end of the life of your product, it should go to a specially-adapted waste recycling centre.
