User manual

OPERATION

1) reservoir :

Removing and lling the reservoir : Do not pour water directly into the reservoir when it is tted to its base.

Whenever you need to ll the reservoir you must rst ensure that the cartridge is correctly in place in the reservoir,

disconnect the reservoir from the base (moving it horizontally), lift the lling cap and ll the reservoir up to its

maximum level.

Reposition the reservoir on its base (moving it horizontally) until you hear the click sound.

IMPORTANT: Do not use any additives in the reservoir

What water should I use?

Your straightener has been designed to function using tap water. Test your water with the hardness paper

supplied with your appliance**. If the hardness exceeds 9°F, use demineralised water that you can get from

the shops.

Never use water which contains additives (starch, perfume, aromatic substances, softeners, etc.),

nor water from batteries or condensation (for example water from clothes dryers, water from refrigerators,

from air conditioning units or rain water).

This is because they contain organic waste or mineral elements which become concentrated under the eect

of heat and cause cracklings, brown colours or the premature ageing of your straightener.

If your water is very hard, we recommend you use a mixture 50 % tap water and 50 % demineralised water

which you can get from the shops.

If the water runs out:

2. GENERAL DESCRIPTION

3. BEFORE STARTING TO USE YOUR STRAIGHTENER

A. On/o button

B. +/- buttons for reducing / increasing the temperature

C. Digital screen

D. Straightening plates

E. Mobile plate

F. Detachable comb

G. Steam outlet

H. Steam cord

I. Base

J. Detachable water reservoir

K. Filling cap

L. Maximum lling level

M. Power cord

CLIC!