HANDHELD FABRIC STEAMER www.rowentausa.
1 4 5 6 2 3 7 8 DESCRIPTION 1. Voltage selector 5. Steam indicator / Steam (120/230V) 2. Lint pad 3. Fabric brush 4. Steam control dial 6. Removable water tank 7. Storage hook 8. Electrical cord button IMPORTANT SAFETY INSTRUCTIONS When using your appliance, basic precautions should always be followed, including the following: Read all instructions before using this product.
• Do not direct steam at people or animals, or use steamer on garment while they are being worn. • Never yank the cord to disconnect from outlet, instead grasp plug and pull to disconnect. • Always disconnect appliance from electrical outlet when filling with water, emptying or when not in use. • Do not operate appliance with a damaged cord or if appliance has been dropped or damaged. • To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance.
Before use Please read the instructions for use and Important Safeguards carefully. • Remove any packaging from the appliance. • Do not plug in or turn on until assembly is complete. • Set the voltage to the correct position. • Remove the lint pad by pulling it to the bottom. Dual voltage (depending on model) The appliance can work on both, 120V or 230V, AC systems. Be sure the dual voltage selector is in the correct voltage position before plugging in.
• Remove the water tank by pushing it backwards. • Put the tank into the handle until it snaps in. • Unplug the rubber stopper. • Fill the watertank to the top with water and close it securly. • Put the tank into the handle until it snaps in. Important: Heat concentrates the elements contained in water during evaporation.
• To begin steaming, press the steam button with the steamer head facing away from you, in vertical position. Be sure to remove lint pad when steaming as excessive water or steam can cause lint pad color to run. During use or while unit is heating or cooling, do not rest appliance on its head. Place product on its side on a firm, heat resistant, flat surface, as the head will be hot. As the appliance heats, the housing becomes warm. This is normal.
Steaming clothes The Ultra Steam is equipped with a clothes brush. • To attach the accessory, line it up with the steam head. It locks into position with an audible click. • Simply pull on the top of the fabric brush to remove it. You can operate the unit with or without the accessory. Before removing or attaching the steam brush, unplug your appliance and let it cool down. • Hang the wrinkled article of clothing on a clothes hanger. • Pull the clothing tight with one hand.
• Remove the lint pad from the steam brush by grasping on both sides and pulling downwards. The lint pad should slide right off of the brush, and clamp back on after use. "Click" • For storage, attach the lint pad to the steam brush by lining up the slots of the brush with the slots of the lint pad. Gently push the top of the lint pad into place until it snaps in. After use • Unplug the appliance. Empty the water remaining in the tank and leave unit on its side to cool.
TROUBLESHOOTING Issues Possible causes There is no steam. The steamer is not plugged in. Check that your appliance is correctly plugged in. The water level is too low. Unplug your appliance and refill it. Solutions The steam button has Press the steam button 4 seconds not been primed. to begin steaming. The appliance is being used for the first time. When appliance is new, priming of the steam feature may be necessary.
In the interest of improving products, Rowenta reserves the right to change specifications without prior notice. LIMITED WARRANTY This Rowenta product is warranted for 1 year from date of purchase against defects in material and workmanship. During this period, any Rowenta product that, upon inspection by Rowenta, is proved defective, will be repaired or replaced, at Rowenta´s option, without charge to the customer.
CORRESPONDENCE CAN BE SENT TO: ROWENTA 196 Boston Avenue Medford, MA 02155, U.S.A. Tel: (781) 396-0600 www.rowentausa.com OFFICE LOCATION ONLY. Letters will be accepted at this address and packages without a return authorization number will be refused or forwarded to a service center. To service product see service center information below. SERVICE CENTER INFORMATION: If your appliance needs service, ship the product to your nearest regional service center.
