Operation Manual

40
ENGLISH
The lid of the
BeerTender
appliance does
not close.
The tap cover has
not been
positionned
correctly.
Position the tap
cover correctly.
No beer is
being
dispensed.
The appliance is
off.
Switch the
appliance on.
The BeerTender
Keg is empty.
Replace the
BeerTender Keg
with a new one.
There is no keg
inside the
BeerTender
appliance.
Install a keg inside
the BeerTender
appliance.
The BeerTender
appliance tap
handle is not
correctly installed/
positioned.
Install/position the
tap correctly.
The
BeerTender
appliance
produces too
much foam
when
dispensing
beer (see also
chapter 7:
Dispensing
beer).
The BeerTender
Keg has not
reached the right
dispensing
temperature.
Allow the
BeerTender Keg to
cool to the right
temperature. You
can rely on the
temperature
indicator on the
control panel of
your BeerTender
appliance.
The BeerTender
Keg has been
shaken.
Wait 4 hours for the
keg to settle before
dispensing beer.
The tap handle is
being moved too
slowly.
Firmly and quickly
pull the handle
down and forward
as far as it will go.
Beer flows out
too slowly.
The tap handle is
not open all the
way.
Open the tap
completely.
The
BeerTender
appliance is
dispensing
warm beer.
The BeerTender
Keg has not been
chilled for long
enough and is thus
not at the right
serving
temperature.
Allow the
BeerTender Keg to
cool long enough in
the appliance.
2 - BeerT_moreway B80rowenta_ENG.qxd:BeerT B80 Rowenta moreway.qxd 13/03/09 10:30 Page 40