Operation Manual

29/40

Thermal fuse

A thermal fuse is provided as an extra safety precaution. If this triggers and opens the elec-

tric circuit, the cause of this is an abnormal overheating in the appliance. In this case, the

appliance must be repaired by a specialist to ensure continued safe heating. Please contact

the ROWI Service Team to replace defective parts and install a new fuse.

IP degree of protection

P The appliance corresponds to degree of protection IPX0. Appliances of this category

have a no guard, thus protecting them against penetration by foreign bodies. There

exist no guard against Water.

P Only operate these appliances in an upright position.

1.5 Technical data

Power supply 220-240 V~50 Hz

Max. heat output 1800 - 2000 W

Heating stages 2 stages (1000 W/2000 W)

Room heating capacity

(assuming a room height of 2.4 m) approx. 60 m³

Degree of protection IPX0

Protection class II

Setup dimensions (L x W x H) approx. 21,5 x 13,5 x 26,5 cm

Product weight approx. 0.8 kg

Tab. 1: Technical data, fan heater 2000 W

1.6 Prohibited areas of application

P This appliance may not come into contact with water or moisture either during operation

or during storage.

P This appliance is only designed for household use. Do not use this appliance for com-

mercial purposes or in the open air.

P The appliance may not be used for wall or ceiling installation.