Operation Manual

30/40

2. Preparing the Product for Operation

2.1 Unpacking the scope of supply

Check whether the scope of supply is complete and free of defects immediately after open-

ing the packaging. Contact the seller immediately if the scope of supply is incomplete or

defective. Do not put the appliance into operation if it is defective.

2.2 Keeping the original packaging

Keep the original packaging in a safe place over the entire service life of the product. Use

the packaging for storing and transporting the appliance. Only dispose of the packaging

after the product service life has come to an end. You can find information on the proper

disposal in Chapter 8.

2.3 Setting up the appliance

The appliance may only be operated in a secure, vertical and stable position. Always

ensure the minimum distance to be complied with of 50 cm to all sides, flammable objects

and other hazard sources.

P Do not position the appliance directly below a wall socket.

P Mounting the appliance on the ceiling and the wall is prohibited.