Operation Manual

31/40
GB
3. Operating Instructions
3.1 Appliance overview
Fig. 2: Appliance overview
No. Designation
1 Handle
2 Air outlet
3 Temperature control (thermostat)
4 Heating level switch
5 Pilot lamp
Tab. 2: Appliance description
3.2 Start-up and operation
The appliance can be put into operation after removing the packaging. Proceed as follows
for this:
1. Make sure that the heating level switch (see Fig. 2, No. 4) is at "0". Then connect the fan
heater to an earthed socket protected with an earth-leakage circuit breaker.
2. Now switch on the appliance by moving the heating level switch (see Fig. 2, No. 4) to
the desired position. The following applies here:
3
1
2
4
5