Datasheet

Installation Instructions
Roxtec CF 8, CF 32 frames
Insert the CF frame (pic. 2) from outside, and the counter frame (pic. 3)
from the inside.
Fasten the hexagon nuts on the
backside.
Lubricate the inside surfaces of
the frame with Roxtec Lubricant,
especially into the corners.
CF 8 and CF 32 Installation
Cut a rectangular opening in the cabinet according to above tables.
Lubricate all modules for the frame
thoroughly, both the inside and the
outside surfaces.
Adapt modules which are to hold
cables or pipes by peeling layers until
you reach the gap seen in pic. 8.
Achieve a 0.1-1.0 mm gap between
the two halves when held against
the cable/pipe.
Insert the cables/pipes through the
frame.