User's Manual

18
5.4 Conguration
Home Screen
After boot process the xture is ready for operation and starts in the previously enabled mode. At home screen the
following information will appear, depending on the current operating mode:
A DMX Adress
B Operating Mode (DMX Mode, Quick Light or Standalone Mode)
C Next available DMX address depending on the xtures DMX footprint
D External Data protocol (CRMX, DMX, BLE).
E CRMX status and strength
F The dot indicates the active protocol
G Battery Status
H The ash symbole indicates that DC power supply is
connected. It disappears if DC power supply is disconected
Note:
CRMX (RX) C RMX Receiving Mode
CRMX (TX) C RMX Transmit Mode
BLE Bluetooth enabled
5.4.2 Selecting DMX Mode*
At home screen please press ENTER to access to the main menu (level 1).
While using UP / DOWN arrows, please select the menu item “DMX Mode” and conrm
by pressing ENTER.
In the following sub-menu (level 2), you can now choose between 12 different DMX operating modes while using the
UP/Down arrows and conrm by pressing ENTER or jump back by pressing ESC.
After conrmation the display will jump back to main menu (level 1). Press ESC for homescreen, here the selected
DMX mode will be displayed.
*
Note:
For detailed information about the several DMX modes including channel assignment please see our DMX
Control chart.
.
User
Manual
19 CH
RGB
Next
( 20 )
•DMX
BLE
CRMX(TX)
1
B
A
C
D
F
E
60%
GH